查看“MY-IMX6 Linux-3.14.52 模块支持（OV5642）”的源代码

<div>　
　
<b>明远智睿发布的 Linux-3.14.52 已添加对 MY-MODULES-CMOS-OV5642 的支持。</b><br>
　　<span style="background:#CCCCCC"><b>support for MY-MODULES-CMOS-OV5642 was added in Linux-3.14.52 released by MYZR。</b></span><br>

　　支持的开发板型号有：<b>MY-IMX6-EK200</b>，<b>MY-IMX6-EK314</b>，<b>MY-IMX6-EK336</b>。<br>
　　<span style="background:#CCCCCC">development board supported：<b>MY-IMX6-EK200</b>，<b>MY-IMX6-EK314</b>，<b>MY-IMX6-EK336</b>。</span><br>


　　烧录明远智睿发布的 image 文件即可测试 OV5642 模块，参见本文中的“模块测试”章节。<br>
　　<span style="background:#CCCCCC">OV5642 module can be tested by programming image file released by MYZR，refer to “module test”section in this charpter。</span><br>

= '''模块测试(module test)''' =
----
== '''模块测试步骤(procedures of module test)''' ==
=== 模块连接(module link) ===
　　把扩展模块 MY-MODULES-CMOS-OV5642 正确插入开发板的 CAMARE 接口。<br>
　　<span style="background:#CCCCCC">correctly insert expansion module of MY-MODULES-CMOS-OV5642 into CAMARE port on development board。</span>
=== 上电启动(power up and boot) ===
　　开发板与模块正确连接后，即可为开发板上电。等待系统启动完成。<br>
　　<span style="background:#CCCCCC">after correct connection between development board and module，power up development board. wait untill system is finished with booting。</span><br>
=== 加载驱动模块(load drving module) ===
　　# insmod /lib/modules/3.14.52-svn*/kernel/drivers/media/platform/mxc/capture/ov5642_camera.ko<br>
=== 执行测试命令(run test command) ===
　　# /unit_tests/mxc_v4l2_overlay.out -iw 640 -ih 480 -ow 640 -oh 480<br>

== '''测试结果说明(test reulst instruction)''' ==
　　执行完测试命令后，在显示屏上可以看到摄像头采集到的图像。<br>
　　<span style="background:#CCCCCC">after running test commands,screen will display images collected by the camera。</span><br>

= '''其它说明(other instructions)''' =
----
　　MY-MODULES-CMOS-OV5642 的源码是开放的，内核目录下的驱动文件位置：drivers/media/platform/mxc/capture/ov5642.c。<br>
　　<span style="background:#CCCCCC">MY-MODULES-CMOS-OV5642 source code is open source，position of driving files under kernel directory：drivers/media/platform/mxc/capture/ov5642.c。</span><br>
</div>