查看“MYZR-IMX6-MB200 硬件介绍”的源代码

<div>

= '''接口概览（overview of interfaces)''' =
----
== '''正面图(front view)''' ==
[[文件:myimx6ek200_front.jpg|647px]]

== '''背面图(rear view)''' ==
[[文件:myimx6ek200_rear view.jpg|642px]]

== '''图示模块(icon module)''' ==
{| class="wikitable"
|-
!图示<br>(graphic)	
!接口描述<br>(interface description)	
!丝印<br>(silk screen)	
!图示<br>(graphic)	
!接口描述<br>(interface description)
!丝印<br>(silk screen)
|-
|1	
|18/24bit LVDS0	
|J24	
|20	
|UART4_RS232	
|P1
|-
|2	
|18/24bit RGB	
|J23	
|21	
|UART3_RS485	
|J2
|-
|3	
|18/24bit LVDS1	
|J22	
|22	
|MINI_PCIE	
|J6
|-
|4	
|10M/100M Ethernet-1	
|P4	
|23	
|UART2/3/4/5_TTL	
|J1
|-
|5	
|EAR	
|J20	
|24	
|GPIO/SD2	
|J4
|-
|6	
|MIC	
|J18	
|25	
|SPI1/2	
|J7
|-
|7	
|HDMI	
|J15	
|26	
|SIM_CARD	
|CON1
|-
|8	
|PWR_SATA	
|J12	
|27	
|MIPI-CSI	
|J9
|-
|9	
|MINIUSB	
|J13	
|28	
|CMOS_CSI	
|J14
|-
|10	
|SATA	
|J11	
|29	
|CAN2	
|J16
|-
|11	
|10M/100M Ethernet-2	
|P3	
|30	
|CAN1	
|J19
|-
|12	
|USBHOST	
|J8	
|31	
|I2C1/2/3	
|J21
|-
|13	
|UART1_RS232	
|P2	
|32	
|GPS_ANT	
|E4
|-
|14	
|PWR_Switch	
|J5	
|33	
|GPS	
|U15
|-
|15	
|DC_5V_IN	
|J3	
|34	
|MINI_PCI_FPC	
|J26
|-
|16	
|nRESET	
|SW1	
|35	
|SD3	
|J25
|-
|17	
|KEY1	
|SW2	
|36	
|WIFI	
|U16
|-
|18	
|KEY2	
|SW3	
|37	
|RTC	
|U19
|-
|19	
|KEY3	
|SW4	
|38	
|RTC_Batter	
|BT1
|}


= '''接口功能(interface function)''' =
----
== '''18/24bit LVDS0''' ==
　　丝印(silk screen)：J24<br>
　　LVDS0液晶是24bit模式，兼容18bit模式，通过此接口可连接明远智睿公司生产的不同尺寸规格的电阻LVDS液晶屏和电容LVDS液晶屏。LVDS0接口座采用了进口连接器，抛弃了国内便宜的抽屉式，采用的是对面按压式，保证安装更容易，性能，连接性更好。<br>
　　<span style="background:#CCCCCC">LVDS0 crystal liquid is 24 bit mode，compatible with 18bit mode，through which LVDS resistance screen panel and LVDS capacitor screen panel in different sizes and specifications produced by MYZR can be cnnected。LVDS0 interface block is build with connector imported，abandon the cheap drawer type produced domestically，which is opposite press type to ensure easier installation,better performance and connectivity 。</span><br>
　　引脚及信号定义如下：<br>
　　<span style="background:#CCCCCC">definition of pin & signal as below：</span><br>
[[文件:myimx6_mb200_2.1.0.1.png]]
{| class="wikitable"
|-
!引脚<br>(pin)	
!信号<br>(singnal)	
!描述<br>(description)
|-
|J24-16	
|SD1_DAT1/TOUCH_nEINT1	
|GPIO控制<br>(GPIO control)
|-
|J24-17	
|NANDF_CS3	
|GPIO控制<br>(GPIO control)
|-
|J24-19	
|DISP0_CONTRAST	
|LVDS0背光调节<br>(LVDS0 backlight adjustment)
|-
|J24-21	
|TOUCH_SCL	
|I2C时钟<br>(I2C clock)
|-
|J24-22	
|TOUCH_SDA	
|I2C数据<br>(I2C data)
|}


== '''18/24bit RGB''' ==
　　丝印(silkscreen):J23<br>
　　RGB液晶是24bit模式，兼容18bit/16bit模式，通过此接口可连接明远智睿公司生产的不同尺寸规格的电阻RGB液晶屏和电容RGB液晶屏。RGB液晶接口座采用了进口连接器，抛弃了国内便宜的抽屉式，采用的是对面按压式，保证安装更容易，性能，连接性更好。<br>
　　<span style="background:#CCCCCC">RGB crystal liquid is 24bit mode，compatible to 18bit/16bit mode,through which RGB resistance screen panel and RGB capacitor screen panel in different sizes and specifications produced by MYZR can be cnnected，RGB interface block is build with connector imported，abandon the cheap drawer type produced domestically，which is opposite press type to ensure easier installation,better performance and connectivity。</span><br>
　　引脚及信号定义：<br>
　　<span style="background:#CCCCCC">definition of pin & signal：</span><br>
[[文件:myimx6_mb200_2.2.0.1.png]]
{| class="wikitable"
|-
!引脚<br>(pin)	
!信号<br>(signal)
!描述<br>(description)
|-
|J23-31	
|SD1_DAT1/TOUCH_nEINT1	
|GPIO控制<br>(GPIO control)
|-
|J23-30	
|NANDF_CS3	
|GPIO控制<br>(GPIO control)
|-
|J23-19	
|DISP0_CONTRAST	
|LVDS0背光调节<br>(LVDS0 backlight adjustment)
|-
|J23-32	
|TOUCH_SCL	
|I2C时钟<br>(I2C clock)
|-
|J23-33	
|TOUCH_SDA	
|I2C数据<br>(I2C data)
|}


== '''18/24bit LVDS1''' ==
　　丝印(silk screen)：J22<br>
　　LVDS1液晶接口跟LVDS0液晶接口定义，接插件型号完全一样，用户可以直接把LVDS0处的液晶直接接到LVDS1处。<br>
　　<span style="background:#CCCCCC">LVDS1 crystal liquid interface is the same as LVDS0 in terms of definition and connector model，users can connect crytal liquid in LVDS0 directly to LVDS1。</span><br>
　　引脚及信号定义：<br>
　　<span style="background:#CCCCCC">definition of pin & signal：</span><br>
[[文件:myimx6_mb200_2.3.0.1.png]]
{| class="wikitable"
|-
!引脚<br>(pin)
!信号<br>(signal)	
!描述<br>(description)
|-
|J22-16	
|SD1_DAT1/TOUCH_nEINT1	
|GPIO控制<br>(GPIO control)
|-
|J22-17	
|NANDF_CS3	
|GPIO控制<br>(GPIO control)
|-
|J22-19	
|DISP0_CONTRAST	
|LVDS0背光调节<br>(LVDS0 backlight adjustment)
|-
|J22-21	
|TOUCH_SCL	
|I2C时钟<br>(I2C clock)
|-
|J22-22	
|TOUCH_SDA	
|I2C数据<br>(I2C data)
|}


== '''10M/100M Ethernet-1''' ==
丝印(silk screen)：P4<br>
接口属性：百兆网标准接口<br>
<span style="background:#CCCCCC">interface property：100 - Mbps Ethernet standard interface</span><br>


== '''耳机输出(earphone output)''' ==
丝印(silk screen)：J20<br>
接口属性：音频信号输出，3.5mm接口<br>
<span style="background:#CCCCCC">interface property：audio signal output，3.5mm interface</span><br>


== '''麦克风输入(microphone input)''' ==
丝印(silk screen)：J18<br>
接口属性：音频信号输入，3.5mm接口<br>
<span style="background:#CCCCCC">interface propoerty：audio signal input，3.5mm interface</span><br>


== '''HDMI''' ==
丝印(silkscreen)：J5<br>
接口属性：HDMI-1.4标准接口<br>
<span style="background:#CCCCCC">interface property：HDMI-1.4 standard interface</span><br>


== '''SATA电源(SATA power supply)''' ==
丝印(silkscreen)：J12<br>
引脚及信号定义：<br>
<span style="background:#CCCCCC">definition of pin & signal：</span><br>
{| class="wikitable"
|-
!引脚<br>(pin)	
!信号<br>(signal)
!描述<br>(description)
|-
|J12-1	
|5VIN	
|5V电源输入<br>(5V power input)
|-
|J12-2	
|GND	
|数字地<br>(digital)
|-
|J12-3	
|GND	
|数字地<br>(digital)
|-
|J12-4	
|NC	
|未连接<br>(unconnected)
|}

== '''OTG''' ==
丝印(silkscreen)：J5<br>
接口属性：USB ON-The-GO，用于烧写<br>
<span style="background:#CCCCCC">interface property：USB ON-The-GO，for burn and write</span><br>


== '''SATA II''' ==
丝印(silkscreen)：J11<br>
接口属性：3Gbps SATA II标准接口<br>
<span style="background:#CCCCCC">interface property：3Gbps SATA II standard interface</span><br>


== '''10M/100M Ethernet-2''' ==
丝印(silkscreen)：P3<br>
接口属性：百兆网标准接口<br>
<span style="background:#CCCCCC">interface property：100 - Mbps Ethernet standard interface</span><br>


== '''USB扩展(USB expansion)''' ==
丝印(silkscreen):J8<br>
接口属性：USB1扩展双USB，标准USB接口<br>
<span style="background:#CCCCCC">interface property：USB1 expanded to dual USB，standard USB interface</span><br>


== '''调试串口(debug uart) ''' ==
丝印(silkscreen)：P2<br>
接口属性：3线标准RS232接口，用作调试串口<br>
<span style="background:#CCCCCC">interface property：3 thread standard RS232 port，for debug of sirial port</span><br>
[[文件:myimx6_mb200_2.13.0.1.png|642px]]


== '''主电源开关(main power supply switch)''' ==
丝印(silkscreen)：J3<br>
接口属性：电源开关<br>
<span style="background:#CCCCCC">interface property：power supply switch</span><br>
状态属性：—，闭合；O，断开<br>
<span style="background:#CCCCCC">status property：—，close；O，off</span><br>


== '''主电源输入(main power supply switch)''' ==
丝印(silkscreen)：J4<br>
接口属性(interface property)：<br>
	　　内正外负插孔<br>
　　　　<span style="background:#CCCCCC">jack with inside positive and outside negative</span><br>
	　　电压(voltage)：5V<br>
	　　电流(current)：2.5A及以上<br>

== '''复位(reset)''' ==
丝印(silkscreen)：SW1<br>
功能：复位<br>
<span style="background:#CCCCCC">function：reset</span><br>


== '''唤醒(wake up)''' ==
丝印(silkscreen)：SW2<br>
接口属性：休眠唤醒<br>
<span style="background:#CCCCCC">interface property：sleeping wake up</span><br>


== '''音量加(volume up)''' ==
丝印(silkscreen)：SW3<br>
接口属性：音量控制（音量加）<br>
<span style="background:#CCCCCC">interface property：volume control（volume up）</span><br>


== '''音量减(volume down)''' ==
丝印(silkscreen)：SW2<br>
接口属性：音量控制（音量减）<br>
<span style="background:#CCCCCC">interface property：volume control（volume down）</span><br>


== '''RS-232串口(RS-232 serial port)''' ==
丝印(silkscreen)：P1<br>
接口属性：UART4，3线标准RS232接口<br>
<span style="background:#CCCCCC">interface property：UART4，3 thread standard RS232 port</span><br>
[[文件:myimx6_mb200_2.20.0.1.png|642px]]

== '''RS-485串口(RS-485 serial port)''' ==
丝印(silkscreen)：J2<br>
接口属性：UART3，RS-485串口<br>
<span style="background:#CCCCCC">interface property：UART3，RS-485 serial port</span><br>
[[文件:myimx6_mb200_2.21.0.1.png|642px]]

== '''MINI-PCIE''' ==
丝印(silkscreen)：J6<br>
接口属性：标准MINI-PCIE接口<br>
<span style="background:#CCCCCC">interface property：standard MINI-PCIE port</span><br>


== '''串口扩展/TTL电平(serial port expansion/TTL electrical level)''' ==
丝印(silkscreen)：J1<br>
[[文件:myimx6_mb200_2.23.0.1.png|642px]]


== '''GPIO/SD2''' ==
丝印(silkscreen)：J4<br>
[[文件:myimx6_mb200_2.24.0.1.png|642px]]


== '''SPI扩展(SPI expansion)''' ==
丝印(silkscreen)：J7<br>
[[文件:myimx6_mb200_2.25.0.1.png|642px]]


== '''SIM卡座(SIM cassette)''' ==
丝印(silkscreen)：CON1<br>
接口属性：标准的SIM卡座<br>
<span style="background:#CCCCCC">interface property：standard SIM cassette</span><br>


== '''MIPI-CSI''' ==
丝印(silkscreen):J9<br>
[[文件:myimx6_mb200_2.27.0.1.png]]


== '''CMOS-CSI''' ==
丝印(silkscreen):J14<br>
[[文件:myimx6_mb200_2.28.0.1.png|642px]]


== '''CAN2''' ==
丝印(silkscreen):J16<br>
接口属性：CAN2<br>
<span style="background:#CCCCCC">interface property：CAN2</span><br>
[[文件:myimx6_mb200_2.29.0.1.png]]


== '''CAN1''' ==
丝印(silkscreen):J19<br>
接口属性：CAN1<br>
<span style="background:#CCCCCC">interface property：CAN1</span><br>
[[文件:myimx6_mb200_2.30.0.1.png]]


== '''I2C扩展(I2C expansion)''' ==
丝印(silkscreen):J21<br>
[[文件:myimx6_mb200_2.31.0.1.png|642px]]


== '''GPS天线座(GPS antenna pedestal)''' ==
丝印(silkscreen):E4<br>
接口属性：天线座<br>
<span style="background:#CCCCCC">interface property：antenna pedestal</span><br>


== '''GPS''' ==
丝印(silkscreen):U15<br>
模块型号：NEO-6M<br>
<span style="background:#CCCCCC">module model：NEO-6M</span><br>


== '''MINI_PCIE_FPC''' ==
丝印(silkscreen):J26<br>
注意：跟标准的MINI_PCIE座子不能同时使用，即2选1。<br>
<span style="background:#CCCCCC">note：can't be used with MINI_PCIE simultaneously，e.g can only choose one from the two。</span><br>
[[文件:myimx6_mb200_2.34.0.1.png]]


== '''SD3''' ==
丝印(silkscreen):J25<br>
接口属性：标准SD卡座<br>
<span style="background:#CCCCCC">interface property：standard SD cassette</span><br>
[[文件:myimx6_mb200_2.35.0.1.png|642px]]

== '''WIFI''' ==
丝印(silkscreen):U16<br>
模块型号：UM12BS<br>
<span style="background:#CCCCCC">module model：UM12BS</span><br>
[[文件:myimx6_mb200_2.36.0.1.png|642px]]

== '''RTC''' ==
丝印(silkscreen):U19<br>
接口属性：I2C通信的实时时钟<br>
<span style="background:#CCCCCC">interface property：real clock for I2C communication</span><br>
[[文件:myimx6_mb200_2.37.0.1.png|642px]]

== '''RTC_Batter''' ==
丝印(silkscreen):BT1<br>
</div>