查看“MYZR-RK3399-EK314 Burn Manual”的源代码

[^_^]:  
    MY-RK3399-EK314 Burn Manual
<br>

= '''Ready to Burn Tool''' =
== '''Download burning tool'''==
Download the burning tool :AndroidTool_Release_v2.58.zip 
Unzip AndroidTool_Release_v2.58.zip..

== '''Download usb driver'''==
Download the usb driver archive:DriverAssitant_v4.5.rar
Install and extract DriverAssitant_v4.5.rar<br>
[[文件:My-rk3399-ek314_download_3.1.1.png|642px]]<br>
Double-click the red arrow file to install
== '''Open burning tool'''==
[[文件:My-rk3399-ek314_download_3.1.2.png|642px]]<br>
Double-click the red arrow file to open the burning tool <br>
[[文件:My-rk3399-ek314_download_3.1.3.png|642px]]<br>

== '''Programming instructions'''==
* If you want to flash the unified firmware for all images, skip to the section "Flashing the same firmware".
* If you want to program the kernel, u-boot or file system separately, skip to the section "Program the kernel, u-boot or file system separately".
== '''Flash unified firmware'''==
*Click to upgrade firmware
*Click "Firmware" to select the firmware to be burned
*Using USB cable to connect development board and computer
*Press and hold the vol + button of the development board, turn on the power of the development board, and release the vol + button when the programming tool appears "发现一个LOADER设备"
*Click “升级” to flash<br>
[[文件:My-rk3399-ek314_download_3.1.4.png|642px]]<br>
**note**

Flashing from android system to ubuntu system requires flash to be erased before programming, and burning from ubuntu system to android system must also be erased before programming.

== '''Write the kernel separately, u-boot or file system'''==
*Click to download mirror  
*Right-click in the table and select Import Configuration, select the configuration file, and the configuration file is in the root directory of the programming tool. rk3399-config.cfg is the configuration of ubuntu16.04, rk3399-android81.cfg is the configuration of android8.1  
*After importing the configuration, check the box before the image to be flashed.  
    Loader：MiniLoaderAll.bin
    Parameter：parameter.txt
    Uboot：uboot.img
    Trust：trust.img
    Boot：boot.img
    Rootfs：rootfs.img
*Using USB cable to connect development board and computer  
*Press and hold the vol + button of the development board, turn on the power of the board, and release the vol + button when the programming tool displays“发现一个LOADER设备”  
*Click execute to start programming<br>
[[文件:My-rk3399-ek314_download_3.1.5.png|642px]]<br>