查看“MYZR-R16-EK166 MfgTool User Guide”的源代码

<div>

= '''Install  PhoenixSuit'''=
1)Download the PhoenixSuit_CN.msi file and double-click to run.<br/>

Click next<br/>
[[File: MY-R16-CB166 bum1.png|642px]]<br>


2)Select the software installation path and click next.<br/>
[[File: MY-R16-CB166 bum1-2.png|642px]]<br>
<br>
[[File: MY-R16-CB166 bum1-3.png|642px]]<br>


3)Click Next to install the driver.<br/>
[[File: MY-R16-CB166 bum1-4.png|642px]]<br>



4)Installation complete<br/>
[[File: MY-R16-CB166 bum1-5.png|642px]]<br>


= '''Burning'''=
1)Copy the compiled packaged firmware to your computer.<br/>

2)Android firmware is in the ~/R16/lichee/tools/pack directory, sun8iw5p1_android_evb-30_uart0.img file <br/>

3)Linux firmware is in the ~/tinaV2.1/out/astar-parrot/ directory<br/>
tina_astar-parrot_uart0.img file<br/>

4)Open the PhoenixSuit software, click on the button to flash and click Browse to select the firmware to be programmed.<br/>
[[File: MY-R16-CB166 bum2-1.png|642px]]<br>


5)Connect the computer to the development board with a USB cable, press and hold the VOL+ button on the development board, then turn on the power until the VOL+ button is released when the following window pops up, and click "Yes"<br/>
[[File: MY-R16-CB166 bum2-2.png|642px]]<br>


6)Waiting for programming to complete。<br/>
[[File: MY-R16-CB166 bum2-3.png|642px]]<br>


7)Burning completed<br/>
[[File: MY-R16-CB166 bum2-4.png|642px]]<br>

</div>