http://wiki.myzr.com.cn/index.php?action=history&feed=atom&title=MYZR-I.MX8Mmini-CB240_Programming_ManualMYZR-I.MX8Mmini-CB240 Programming Manual - 版本历史2026-05-25T03:11:21Z本wiki的该页面的版本历史MediaWiki 1.27.1http://wiki.myzr.com.cn/index.php?title=MYZR-I.MX8Mmini-CB240_Programming_Manual&diff=3846&oldid=prevAdmin：创建页面，内容为“### download file ------ Open the network disk to "2.1_OS_Linux-4.14.98 -> 01_ManufacturingToolkit", download the "UUU-MYIMX8MM-L4.14.98" directory and the...”2020-10-26T00:52:49Z<p>创建页面，内容为“### download file ------ Open the network disk to "2.1_OS_Linux-4.14.98 -> 01_ManufacturingToolkit", download the "UUU-MYIMX8MM-L4.14.98" directory and the...”</p>
<p><b>新页面</b></p><div>### download file<br />
<br />
------<br />
<br />
Open the network disk to "2.1_OS_Linux-4.14.98 -> 01_ManufacturingToolkit", download the "UUU-MYIMX8MM-L4.14.98" directory and the "UUU-MYIMX8MM-L4.14.98-Patch.*.rar" compressed package.<br />
<br />
<br />
<br />
### unzip files<br />
<br />
------<br />
<br />
Unzip **MYIMX8MM-L4.14.98-Patch.\*.rar**, copy **fsl-image-validation-myimx8m.tar.bz2** and **fsl-image-validation-myimx8m.manifest** to **image-rootfs-L4.14.98** directory.<br />
<br />
<br />
<br />
### Connect the programming line<br />
<br />
------<br />
<br />
Power off the development board and connect the programming port of the development board to the PC with a USB cable.<br />
<br />
<br />
<br />
### Dial code to download mode<br />
<br />
------<br />
<br />
and set the "Boot Mode" of the development board to "OFF ON".<br />
<br />
<br />
<br />
### Perform burning<br />
<br />
------<br />
<br />
Power on the development board, double-click to run the "myimx8mmek240-8mm.bat" file, then the Windows command line window will see the following information:<br />
<br />
```<br />
uuu (Universal Update Utility) for nxp imx chips - libuuu_1.2.135-0-gacaf035<br />
Success 0 Failure 0<br />
1:32 ......<br />
```<br />
<br />
<br />
<br />
### Burning complete<br />
<br />
------<br />
<br />
After the burning is completed, the Windows command line window information is as follows:<br />
<br />
```<br />
uuu (Universal Update Utility) for nxp imx chips - libuuu_1.2.135-0-gacaf035<br />
Success 1 Failure 0<br />
1:32 24/24 [Done] FBK: DONE<br />
Please press any key to continue...<br />
```<br />
<br />
<br />
<br />
### Start the development board<br />
<br />
------<br />
<br />
Power off the development board, switch "Boot Mode" to "ON OFF", and power on the development board, the development board can start normally</div>Admin