Admin：Admin移动页面MY-IMX6-A9 Linux-3.0.35 v3.0至MYZR-IMX6-A9 Linux-3.0.35 v3.0，不留重定向

2020-10-22T05:56:21Z

Admin移动页面MY-IMX6-A9 Linux-3.0.35 v3.0至MYZR-IMX6-A9 Linux-3.0.35 v3.0，不留重定向

2020年10月22日 (四) 05:56 Admin

2020-10-22T05:56:10Z

Admin：创建页面，内容为“ [^_^]: MY-IMX6-A9 Linux-3.0.35 Build Reference Manual v3.0 ## Download relevant documents #### Cross-compile tool chain 　　A9 series：Open the network...”

2019-01-03T06:25:09Z

创建页面，内容为“ [^_^]: MY-IMX6-A9 Linux-3.0.35 Build Reference Manual v3.0 ## **Download relevant documents** #### Cross-compile tool chain 　　**A9 series**：Open the network...”

新页面

[^_^]: MY-IMX6-A9 Linux-3.0.35 Build Reference Manual v3.0

## **Download relevant documents**
#### Cross-compile tool chain
　　**A9 series**：Open the network disk to **2.1_OS_Linux-3.0.35 -> 03_toolchain**，Download **MY-IMX-A9** Directory.
#### Source code
　　**u-boot**：Open the network disk to **2.1_OS_Linux-3.0.35 -> 02_source**，Download **u-boot-2016.03-*.tar.bz2** (**Source package version number svn315 and above**).
　　**Kernel**：Open the network disk to **2.1_OS_Linux-3.0.35 -> 02_source**，Download **linux-3.0.35-*.tar.bz2** (**Source package version number svn31 and above**).

 
## **Install cross compilation tool chain**
* Unload cross compilation tool chain
<pre>
=====> Input:
tar xf gcc-4.6.2-glibc-2.13-linaro-multilib-2011.12.tar.bz2 -C /home/myzr/my-work/03_toolchain
</pre>
* Copy the tool chain configuration file
<pre>
=====> Input:
cp environment-setup-gcc-4.6-arm.sh /home/myzr/my-work/03_toolchaingcc-4.6.2-glibc-2.13-linaro-multilib-2011.12/
</pre>
* Source Toolchain Profile
<pre>
=====> Input:
source /home/myzr/my-work/03_toolchain/gcc-4.6.2-glibc-2.13-linaro-multilib-2011.12/environment-setup-gcc-4.6-arm.sh
</pre>
* Verify cross compilation tool installation
<pre>
=====> Input:
${CROSS_COMPILE}gcc -v

=====> Output:
Using built-in specs.
COLLECT_GCC=arm-fsl-linux-gnueabi-gcc
COLLECT_LTO_WRAPPER=/home/myzr/my-work/03_toolchain/gcc-4.6.2-glibc-2.13-linaro-multilib-2011.12/fsl-linaro-toolchain/bin/../libexec/gcc/arm-fsl-linux-gnueabi/4.6.2/lto-wrapper
Target: arm-fsl-linux-gnueabi
Configured with: /work/build/.build/src/gcc-linaro-4.6-2011.06-0/configure --build=i686-build_pc-linux-gnu --host=i686-build_pc-linux-gnu --target=arm-fsl-linux-gnueabi --prefix=/work/fsl-linaro-toolchain-2.13 --with-sysroot=/work/fsl-linaro-toolchain-2.13/arm-fsl-linux-gnueabi/multi-libs --enable-languages=c,c++ --with-pkgversion='Freescale MAD -- Linaro 2011.07 -- Built at 2011/08/10 09:20' --enable-__cxa_atexit --disable-libmudflap --disable-libgomp --disable-libssp --with-gmp=/work/build/.build/arm-fsl-linux-gnueabi/build/static --with-mpfr=/work/build/.build/arm-fsl-linux-gnueabi/build/static --with-mpc=/work/build/.build/arm-fsl-linux-gnueabi/build/static --with-ppl=/work/build/.build/arm-fsl-linux-gnueabi/build/static --with-cloog=/work/build/.build/arm-fsl-linux-gnueabi/build/static --with-libelf=/work/build/.build/arm-fsl-linux-gnueabi/build/static --with-host-libstdcxx='-static-libgcc -Wl,-Bstatic,-lstdc++,-Bdynamic -lm -L/work/build/.build/arm-fsl-linux-gnueabi/build/static/lib -lpwl' --enable-threads=posix --enable-target-optspace --enable-plugin --enable-multilib --with-local-prefix=/work/fsl-linaro-toolchain-2.13/arm-fsl-linux-gnueabi/multi-libs --disable-nls --enable-c99 --enable-long-long --with-system-zlib
Thread model: posix
gcc version 4.6.2 20110630 (prerelease) (Freescale MAD -- Linaro 2011.07 -- Built at 2011/08/10 09:20)
</pre>

 
## **u-boot compilation**
### Preparation before compilation
* Create a compile working directory
<pre>
=====> Input:
mkdir ~/my-work/02_source/ -p
</pre>
* Unpack source code to working directory
<pre>
=====> Input:
tar xf u-boot-2016.03-svn*.tar.bz2 -C ~/my-work/02_source/
</pre>

### Compile the u-boot target file
* Enter source directory
<pre>
=====> Input:
cd ~/my-work/02_source/u-boot-2016.03
</pre>
* Generate the target development board. config file
<pre>
=====> Input:
make myimx6ek200-6q-1g_defconfig

=====> Output:
HOSTCC scripts/basic/fixdep
HOSTCC scripts/kconfig/conf.o
SHIPPED scripts/kconfig/zconf.tab.c
SHIPPED scripts/kconfig/zconf.lex.c
SHIPPED scripts/kconfig/zconf.hash.c
HOSTCC scripts/kconfig/zconf.tab.o
HOSTLD scripts/kconfig/conf
#
# configuration written to .config
#
</pre>
【Note】：**myimx6ek200-6q-1g_defconfig** above **make** after change to the configuration file corresponding to the development board model.
<pre>
********** MY-IMX6-EK200 **********
myimx6ek200-6q-1g_defconfig myimx6ek200-6q-2g_defconfig myimx6ek200-6q-512m_defconfig
myimx6ek200-6u-1g_defconfig myimx6ek200-6u-2g_defconfig myimx6ek200-6u-512m_defconfig
myimx6ek200-6s-512m_defconfig myimx6ek200-6s-1g_defconfig myimx6ek200-6s-128m_defconfig
myimx6ek200-6qp-1g_defconfig myimx6ek200-6qp-2g_defconfig myimx6ek200-6qp-512m_defconfig

********** MY-IMX6-EK314 **********
myimx6ek314-6q-1g_defconfig myimx6ek314-6q-2g_defconfig myimx6ek314-6q-512m_defconfig
myimx6ek314-6u-1g_defconfig myimx6ek314-6u-2g_defconfig myimx6ek314-6u-512m_defconfig
myimx6ek314-6s-512m_defconfig myimx6ek314-6s-1g_defconfig myimx6ek314-6s-128m_defconfig
myimx6ek314-6qp-1g_defconfig myimx6ek314-6qp-2g_defconfig myimx6ek314-6qp-512m_defconfig
</pre>

* compiling
<pre>
=====> Input:
make

=====> Output:
scripts/kconfig/conf --silentoldconfig Kconfig
CHK include/config.h
UPD include/config.h
GEN include/autoconf.mk
GEN include/autoconf.mk.dep
CHK include/config/uboot.release
CHK include/generated/timestamp_autogenerated.h
CFG u-boot.cfg
......
LD u-boot
OBJCOPY u-boot-nodtb.bin
OBJCOPY u-boot.srec
SYM u-boot.sym
COPY u-boot.bin
CFGS board/myzr/myimx6/myimx6a9-6q-ddr3.cfg.cfgtmp
MKIMAGE u-boot.imx
</pre>
**Note: If there is a prompt “cc1: error”，usually the configuration of the cross-compilation tool does not work, you can perform this step after pressing the "source tool chain profile” operation in the previous "cross compile tool chain installation".**

* u-boot Target File
**u-boot.imx** is the target file.

### Compile U-boot environment variable scripts
<pre>
=====> Input:
mkimage -A arm -O linux -T script -C none -a 0 -e 0 -n "myzr bootscripts" -d board/myzr/bootscripts/myimx6a9_l3035_script.cmd my_environment.scr

=====> Output:
Image Name: myzr bootscripts
Created: Wed Jan 2 09:39:38 2019
Image Type: ARM Linux Script (uncompressed)
Data Size: 2090 Bytes = 2.04 kB = 0.00 MB
Load Address: 00000000
Entry Point: 00000000
Contents:
Image 0: 2082 Bytes = 2.03 kB = 0.00 MB
</pre>

### Target File
**"u-boot.imx " and " my_environment.scr" That is, the compiled target file, saving the two files**

 
## **Kernel compilation**
### Preparation before compilation
* Create a compile working directory
<pre>
=====> Input:
mkdir ~/my-work/02_source/ -p
</pre>
* Unzip the source package to the working directory
<pre>
=====> Input:
tar xf linux-3.0.35-svn*.tar.bz2 -C ~/my-work/02_source/
</pre>
### Compile the kernel target file
* Enter source directory
<pre>
=====> Input:
cd ~/my-work/02_source/linux-3.0.35
</pre>
* To generate the target platform". config "file
<pre>
=====> Input:
make myimx6a9_defconfig

=====> Output:
HOSTCC scripts/basic/fixdep
HOSTCC scripts/kconfig/conf.o
SHIPPED scripts/kconfig/zconf.tab.c
SHIPPED scripts/kconfig/lex.zconf.c
SHIPPED scripts/kconfig/zconf.hash.c
HOSTCC scripts/kconfig/zconf.tab.o
HOSTLD scripts/kconfig/conf
#
# configuration written to .config
#
</pre>
**Note: If there is an error“Can't find default configuration "arch/x86/configs” ，because the configuration of the cross compilation tool chain did not work,You can do this step again after you have done it once in the "source toolchain configuration file" in "cross-compile toolchain installation earlier"**

* Compiles kernel target files
<pre>
=====> Input:
make zImage

=====> Output:
scripts/kconfig/conf --silentoldconfig Kconfig
CHK include/linux/version.h
UPD include/linux/version.h
CHK include/generated/utsrelease.h
UPD include/generated/utsrelease.h
Generating include/generated/mach-types.h
CC kernel/bounds.s
......
AS arch/arm/boot/compressed/piggy.gzip.o
LD arch/arm/boot/compressed/vmlinux
OBJCOPY arch/arm/boot/zImage
Kernel: arch/arm/boot/zImage is ready
</pre>
* Kernel target file
**arch/arm/boot/zImage** is the kernel target file

### Compile the kernel module package
* Compiling
<pre>
=====> Input:
make modules

=====> Output:
CHK include/linux/version.h
CHK include/generated/utsrelease.h
make[1]: “include/generated/mach-types.h” It's the latest.
CALL scripts/checksyscalls.sh
CC [M] fs/autofs4/init.o
......
LD [M] drivers/usb/gadget/g_serial.ko
LD [M] fs/nls/nls_ascii.ko
LD [M] fs/autofs4/autofs4.ko
LD [M] fs/nls/nls_utf8.ko
</pre>
* Create a save directory for the kernel module
<pre>
=====> Input:
mkdir modules
</pre>
* Install kernel module to specified directory
<pre>
=====> Input:
make modules_install INSTALL_MOD_PATH=./modules

=====> Output:
INSTALL crypto/tcrypt.ko
INSTALL drivers/gpu/drm/drm.ko
INSTALL drivers/gpu/drm/vivante/vivante.ko
......
INSTALL fs/autofs4/autofs4.ko
INSTALL fs/nls/nls_ascii.ko
INSTALL fs/nls/nls_utf8.ko
DEPMOD 3.0.35-myimx6a9-svn42
</pre>
* Package the kernel module files
<pre>
=====> Input:
tar cjf kernel-modules.tar.bz2 -C modules lib
</pre>
### Target File
**"zImage" and "kernel-modules.tar.bz2" are the target files compiled and the two files are saved**

 

## **Linux C program compilation**
### Prepare source code
　　Open the disk to **5_MY-Demo -> MY-Linux-C-Demo**，Download **hello.c** file and copy to virtual machine.
### Compile target file
<pre>
=====> Input:
${CROSS_COMPILE}gcc hello.c -o hello.out
</pre>
**Note: If you have "no command found" information because the configuration of the cross-compilation tool chain is not effective, you can perform this step after pressing the "source tool chain profile" operation in the previous "cross compilation tool chain installation"**
### Run Linux C Target Program
* Copy the compiled" hello.out" to the development board
* Run the Linux C target program on the development board
<pre>
=====> Input:
chmod +x ./hello.out
./hello.out

=====> Output:
MYZR Technology Co.,Ltd.

Web: http://www.myzr.com.cn/
Wiki: http://wiki.myzr.com.cn/
BBS: http://bbs.myzr.com.cn/

Tel: 0756-3628023/3628021
E-mail: service@myzr.com.cn
</pre>

 
--------------------------------------------------------------------------------
<pre>
--------------------------------------------------------------------------------
* ZhuHai MYZR Technology CO.,LTD.
* Latest Update: 2019/01/02
* Supporter: Tang Bin
--------------------------------------------------------------------------------
</pre>

←上一版本	2020年10月22日 (四) 05:56的版本
（没有差异）

@@ 第80行： / 第80行： @@
 【Note】：**myimx6ek200-6q-1g_defconfig** above **make** after change to the configuration file corresponding to the development board model.
 <pre>
-********** MY-IMX6-EK200 **********
+********** MYZR-IMX6-EK200 **********
 myimx6ek200-6q-1g_defconfig     myimx6ek200-6q-2g_defconfig     myimx6ek200-6q-512m_defconfig
 myimx6ek200-6u-1g_defconfig     myimx6ek200-6u-2g_defconfig     myimx6ek200-6u-512m_defconfig
@@ 第86行： / 第86行： @@
 myimx6ek200-6qp-1g_defconfig    myimx6ek200-6qp-2g_defconfig    myimx6ek200-6qp-512m_defconfig
-********** MY-IMX6-EK314 **********
+********** MYZR-IMX6-EK314 **********
 myimx6ek314-6q-1g_defconfig     myimx6ek314-6q-2g_defconfig     myimx6ek314-6q-512m_defconfig
 myimx6ek314-6u-1g_defconfig     myimx6ek314-6u-2g_defconfig     myimx6ek314-6u-512m_defconfig

MYZR-IMX6-A9 Linux-3.0.35 v3.0 - 版本历史

Admin：Admin移动页面MY-IMX6-A9 Linux-3.0.35 v3.0至MYZR-IMX6-A9 Linux-3.0.35 v3.0，不留重定向

2020年10月22日 (四) 05:56 Admin

Admin：创建页面，内容为“ [^_^]: MY-IMX6-A9 Linux-3.0.35 Build Reference Manual v3.0 ## **Download relevant documents** #### Cross-compile tool chain **A9 series**：Open the network...”

Admin：创建页面，内容为“ [^_^]: MY-IMX6-A9 Linux-3.0.35 Build Reference Manual v3.0 ## Download relevant documents #### Cross-compile tool chain 　　A9 series：Open the network...”