Admin：Admin移动页面MY-IMX6-A9 Linux-3.14.52 Build Manual v2.0至MYZR-IMX6-A9 Linux-3.14.52 Build Manual v2.0，不留重定向

2020-10-22T05:55:18Z

Admin移动页面MY-IMX6-A9 Linux-3.14.52 Build Manual v2.0至MYZR-IMX6-A9 Linux-3.14.52 Build Manual v2.0，不留重定向

2020年10月22日 (四) 05:55 Admin

2020-10-22T05:55:04Z

Admin：创建页面，内容为“ [^_^]: MY-IMX6-A9 Linux-3.14.52 Build Reference Manual v2.0 ## Download relevant documents #### Cross-compile tool chain 　　A9 series：Open the network...”

2019-01-03T04:04:43Z

创建页面，内容为“ [^_^]: MY-IMX6-A9 Linux-3.14.52 Build Reference Manual v2.0 ## **Download relevant documents** #### Cross-compile tool chain 　　**A9 series**：Open the network...”

新页面

[^_^]: MY-IMX6-A9 Linux-3.14.52 Build Reference Manual v2.0

## **Download relevant documents**
#### Cross-compile tool chain
　　**A9 series**：Open the network disk to **2.2_OS_Linux-3.14.52 -> 03_toolchain**，Download **MY-IMX-A9** Directory.
#### Source code
　　**u-boot**：Open the network disk to **2.2_OS_Linux-3.14.52 -> 02_source**，Download **u-boot-2016.03-*.tar.bz2** (**Source package version number svn315 and above**).
　　**Kernel**：Open the network disk to **2.2_OS_Linux-3.14.52 -> 02_source**，Download **linux-3.14.52-*.tar.bz2** (**Source package version number svn369 and above**).

 
## **Install cross compilation tool chain**
**1.Execute installation**
<pre>
=====> Input:
./fsl-imx-fb-glibc-x86_64-meta-toolchain-qt5-cortexa9hf-vfp-neon-toolchain-3.14.52-1.1.1.sh

=====> Output:
Enter target directory for SDK (default: /opt/fsl-imx-fb/3.14.52-1.1.1):
=====> Input:
/home/myzr/my-work/03_toolchain/fsl-imx-fb-glibc-x86_64-meta-toolchain-qt5-cortexa9hf-vfp-neon-toolchain-3.14.52-1.1.1
=====> Output:
You are about to install the SDK to "/home/myzr/my-work/03_toolchain/fsl-imx-fb-glibc-x86_64-meta-toolchain-qt5-cortexa9hf-vfp-neon-toolchain-3.14.52-1.1.1". Proceed[Y/n]?
=====> Input:
y
=====> Output:
Extracting SDK...done
Setting it up...done
SDK has been successfully set up and is ready to be used.
</pre>
**2. source Toolchain Profile**
<pre>
=====> Input:
source /home/myzr/my-work/03_toolchain/fsl-imx-fb-glibc-x86_64-meta-toolchain-qt5-cortexa9hf-vfp-neon-toolchain-3.14.52-1.1.1/environment-setup-cortexa9hf-vfp-neon-poky-linux-gnueabi
</pre>
**3. Verify cross compilation tool installation**
<pre>
=====> Input:
$CC -v

=====> Output:
Using built-in specs.
COLLECT_GCC=arm-poky-linux-gnueabi-gcc
COLLECT_LTO_WRAPPER=/home/myzr/my-work/03_toolchain/fsl-imx-fb-glibc-x86_64-meta-toolchain-qt5-cortexa9hf-vfp-neon-toolchain-3.14.52-1.1.1/sysroots/x86_64-pokysdk-linux/usr/bin/arm-poky-linux-gnueabi/../../libexec/arm-poky-linux-gnueabi/gcc/arm-poky-linux-gnueabi/4.9.2/lto-wrapper
Target: arm-poky-linux-gnueabi
Configured with: /home/myzr/my-yocto/imx-3.14.52-1.1.0_ga/imx6qdlsolo__fsl-imx-fb/tmp/work-shared/gcc-4.9.2-r0/gcc-4.9.2/configure --build=x86_64-linux --host=x86_64-pokysdk-linux --target=arm-poky-linux-gnueabi --prefix=/opt/fsl-imx-fb/3.14.52-1.1.1/sysroots/x86_64-pokysdk-linux/usr --exec_prefix=/opt/fsl-imx-fb/3.14.52-1.1.1/sysroots/x86_64-pokysdk-linux/usr --bindir=/opt/fsl-imx-fb/3.14.52-1.1.1/sysroots/x86_64-pokysdk-linux/usr/bin/arm-poky-linux-gnueabi --sbindir=/opt/fsl-imx-fb/3.14.52-1.1.1/sysroots/x86_64-pokysdk-linux/usr/bin/arm-poky-linux-gnueabi --libexecdir=/opt/fsl-imx-fb/3.14.52-1.1.1/sysroots/x86_64-pokysdk-linux/usr/libexec/arm-poky-linux-gnueabi --datadir=/opt/fsl-imx-fb/3.14.52-1.1.1/sysroots/x86_64-pokysdk-linux/usr/share --sysconfdir=/opt/fsl-imx-fb/3.14.52-1.1.1/sysroots/x86_64-pokysdk-linux/etc --sharedstatedir=/opt/fsl-imx-fb/3.14.52-1.1.1/sysroots/x86_64-pokysdk-linux/com --localstatedir=/opt/fsl-imx-fb/3.14.52-1.1.1/sysroots/x86_64-pokysdk-linux/var --libdir=/opt/fsl-imx-fb/3.14.52-1.1.1/sysroots/x86_64-pokysdk-linux/usr/lib/arm-poky-linux-gnueabi --includedir=/opt/fsl-imx-fb/3.14.52-1.1.1/sysroots/x86_64-pokysdk-linux/usr/include --oldincludedir=/opt/fsl-imx-fb/3.14.52-1.1.1/sysroots/x86_64-pokysdk-linux/usr/include --infodir=/opt/fsl-imx-fb/3.14.52-1.1.1/sysroots/x86_64-pokysdk-linux/usr/share/info --mandir=/opt/fsl-imx-fb/3.14.52-1.1.1/sysroots/x86_64-pokysdk-linux/usr/share/man --disable-silent-rules --disable-dependency-tracking --with-libtool-sysroot=/home/myzr/my-yocto/imx-3.14.52-1.1.0_ga/imx6qdlsolo__fsl-imx-fb/tmp/sysroots/x86_64-nativesdk-pokysdk-linux --with-gnu-ld --enable-shared --enable-languages=c,c++ --enable-threads=posix --enable-multilib --enable-c99 --enable-long-long --enable-symvers=gnu --enable-libstdcxx-pch --program-prefix=arm-poky-linux-gnueabi- --without-local-prefix --enable-target-optspace --enable-lto --enable-libssp --disable-bootstrap --disable-libmudflap --with-system-zlib --with-linker-hash-style=gnu --enable-linker-build-id --with-ppl=no --with-cloog=no --enable-checking=release --enable-cheaders=c_global --with-gxx-include-dir=/not/exist/usr/include/c++/4.9.2 --with-build-time-tools=/home/myzr/my-yocto/imx-3.14.52-1.1.0_ga/imx6qdlsolo__fsl-imx-fb/tmp/sysroots/x86_64-linux/usr/arm-poky-linux-gnueabi/bin --with-sysroot=/not/exist --with-build-sysroot=/home/myzr/my-yocto/imx-3.14.52-1.1.0_ga/imx6qdlsolo__fsl-imx-fb/tmp/sysroots/imx6qdlsolo --enable-poison-system-directories --with-mpfr=/home/myzr/my-yocto/imx-3.14.52-1.1.0_ga/imx6qdlsolo__fsl-imx-fb/tmp/sysroots/x86_64-nativesdk-pokysdk-linux --with-mpc=/home/myzr/my-yocto/imx-3.14.52-1.1.0_ga/imx6qdlsolo__fsl-imx-fb/tmp/sysroots/x86_64-nativesdk-pokysdk-linux --enable-nls --with-arch=armv7-a
Thread model: posix
gcc version 4.9.2 (GCC)
</pre>

 
## **u-boot compilation**
### Preparation before compilation
* Create a compile working directory
<pre>
=====> Input:
mkdir ~/my-work/02_source/ -p
</pre>
* Unpack source code to working directory
<pre>
=====> Input:
tar xf u-boot-2016.03-svn*.tar.bz2 -C ~/my-work/02_source/
</pre>

### Compilation of u-book target files
* Enter source directory
<pre>
=====> Input:
cd ~/my-work/02_source/u-boot-2016.03
</pre>
*Generate the target development board ”. config“ file
<pre>
=====> Input:
make myimx6ek200-6q-1g_defconfig

=====> Output:
HOSTCC scripts/basic/fixdep
HOSTCC scripts/kconfig/conf.o
SHIPPED scripts/kconfig/zconf.tab.c
SHIPPED scripts/kconfig/zconf.lex.c
SHIPPED scripts/kconfig/zconf.hash.c
HOSTCC scripts/kconfig/zconf.tab.o
HOSTLD scripts/kconfig/conf
#
# configuration written to .config
#
</pre>
【Note】： **myimx6ek200-6q-1g_defconfig** after **make** is changed to a configuration file corresponding to the development board model.
<pre>
********** MY-IMX6-EK200 **********
myimx6ek200-6q-1g_defconfig myimx6ek200-6q-2g_defconfig myimx6ek200-6q-512m_defconfig
myimx6ek200-6u-1g_defconfig myimx6ek200-6u-2g_defconfig myimx6ek200-6u-512m_defconfig
myimx6ek200-6s-512m_defconfig myimx6ek200-6s-1g_defconfig myimx6ek200-6s-128m_defconfig
myimx6ek200-6qp-1g_defconfig myimx6ek200-6qp-2g_defconfig myimx6ek200-6qp-512m_defconfig

********** MY-IMX6-EK314 **********
myimx6ek314-6q-1g_defconfig myimx6ek314-6q-2g_defconfig myimx6ek314-6q-512m_defconfig
myimx6ek314-6u-1g_defconfig myimx6ek314-6u-2g_defconfig myimx6ek314-6u-512m_defconfig
myimx6ek314-6s-512m_defconfig myimx6ek314-6s-1g_defconfig myimx6ek314-6s-128m_defconfig
myimx6ek314-6qp-1g_defconfig myimx6ek314-6qp-2g_defconfig myimx6ek314-6qp-512m_defconfig

********** MY-IMX6-EK336 **********
myimx6ek336-6q-1g_defconfig myimx6ek336-6q-2g_defconfig myimx6ek336-6q-512m_defconfig
</pre>

* Compiling
<pre>
=====> Input:
make

=====> Output:
scripts/kconfig/conf --silentoldconfig Kconfig
CHK include/config.h
UPD include/config.h
GEN include/autoconf.mk
GEN include/autoconf.mk.dep
CHK include/config/uboot.release
CHK include/generated/timestamp_autogenerated.h
CFG u-boot.cfg
......
LD u-boot
OBJCOPY u-boot-nodtb.bin
OBJCOPY u-boot.srec
SYM u-boot.sym
COPY u-boot.bin
CFGS board/myzr/myimx6/myimx6a9-6q-ddr3.cfg.cfgtmp
MKIMAGE u-boot.imx
</pre>
**Note: If there's a hint “cc1: error”，Usually the configuration of the cross-compilation tool does not work, and you can perform this step after pressing the "source toolchain configuration file" operation in the previous "cross compilation tool chain installation".**

* u-boot Target File
**u-boot.imx**is the target file.

### Compile U-boot environment variable scripts
<pre>
=====> Input:
mkimage -A arm -O linux -T script -C none -a 0 -e 0 -n "myzr bootscripts" -d board/myzr/bootscripts/myimx6a9_l31452_script.cmd my_environment.scr

=====> Output:
Image Name: myzr bootscripts
Created: Wed Jan 2 09:40:07 2019
Image Type: ARM Linux Script (uncompressed)
Data Size: 2327 Bytes = 2.27 kB = 0.00 MB
Load Address: 00000000
Entry Point: 00000000
Contents:
Image 0: 2319 Bytes = 2.26 kB = 0.00 MB
</pre>

### Target File
**"u-boot.imx "and "my_environment_emmc.scr" That is, the compiled target files, save the two files**

 
## **Kernel compilation**
### Preparation before compilation
* Create a compile working directory
<pre>
=====> Input:
mkdir ~/my-work/02_source/ -p
</pre>
* Unpack source code to working directory
<pre>
=====> Input:
tar xf linux-3.14.52-svn*.tar.bz2 -C ~/my-work/02_source/
</pre>
### Compiles kernel target files
* Enter the kernel source directory
<pre>
=====> Input:
cd ~/my-work/02_source/linux-3.14.52
</pre>
* To generate the target platform .config file
<pre>
=====> Input:
make myimx6a9_defconfig

=====> Output:
HOSTCC scripts/basic/fixdep
HOSTCC scripts/kconfig/conf.o
SHIPPED scripts/kconfig/zconf.tab.c
SHIPPED scripts/kconfig/zconf.lex.c
SHIPPED scripts/kconfig/zconf.hash.c
HOSTCC scripts/kconfig/zconf.tab.o
HOSTLD scripts/kconfig/conf
#
# configuration written to .config
#
</pre>
**Note: If there is an error in“Can't find default configuration "arch/x86/configs” ，it is because the configuration of the cross-compilation tool chain is not effective. You can do this after pressing the Source Toolchain Profile in the previous Cross Compiler Toolchain Installation**

* Compiles kernel target files
<pre>
=====> Input:
make zImage

=====> Output:
scripts/kconfig/conf --silentoldconfig Kconfig
CHK include/config/kernel.release
UPD include/config/kernel.release
WRAP arch/arm/include/generated/asm/auxvec.h
......
AS arch/arm/boot/compressed/piggy.lzo.o
LD arch/arm/boot/compressed/vmlinux
OBJCOPY arch/arm/boot/zImage
Kernel: arch/arm/boot/zImage is ready
</pre>
* Kernel target file
**arch/arm/boot/zImage** is the kernel target file

### Build Device Tree Target File
* Execute compile command
<pre>
=====> Input:
make myimx6ek200-6q-1g.dtb

=====> Output:
DTC arch/arm/boot/dts/myimx6ek200-6q-1g.dtb
</pre>
【Note】：The **myimx6ek200-6q-1g.dtb** after **make** is changed to the configuration file corresponding to the development board model.
<pre>
********** MY-IMX6-EK200 **********
myimx6ek200-6q-1g.dtb myimx6ek200-6q-2g.dtb myimx6ek200-6q-512m.dtb
myimx6ek200-6u-1g.dtb myimx6ek200-6u-2g.dtb myimx6ek200-6u-512m.dtb
myimx6ek200-6s-512m.dtb myimx6ek200-6s-1g.dtb myimx6ek200-6s-128m.dtb
myimx6ek200-6qp-1g.dtb myimx6ek200-6qp-2g.dtb myimx6ek200-6qp-512m.dtb

********** MY-IMX6-EK314 **********
myimx6ek314-6q-1g.dtb myimx6ek314-6q-2g.dtb myimx6ek314-6q-512m.dtb
myimx6ek314-6u-1g.dtb myimx6ek314-6u-2g.dtb myimx6ek314-6u-512m.dtb
myimx6ek314-6s-512m.dtb myimx6ek314-6s-1g.dtb myimx6ek314-6s-128m.dtb
myimx6ek314-6qp-1g.dtb myimx6ek314-6qp-2g.dtb myimx6ek314-6qp-512m.dtb

********** MY-IMX6-EK336 **********
myimx6ek336-6q-1g.dtb myimx6ek336-6q-2g.dtb myimx6ek336-6q-512m.dtb
</pre>
* Copy the device tree target file
<pre>
=====> Input:
cp arch/arm/boot/dts/myimx6ek200-6q-1g.dtb ./
</pre>

### Build kernel module package
* Compiling
<pre>
=====> Input:
make modules

=====> Output:
CHK include/config/kernel.release
CHK include/generated/uapi/linux/version.h
CHK include/generated/utsrelease.h
make[1]: “include/generated/mach-types.h"Is the latest.
CALL scripts/checksyscalls.sh
......
LD [M] sound/core/snd-rawmidi.ko
LD [M] sound/usb/snd-usb-audio.ko
LD [M] sound/usb/snd-usbmidi-lib.ko
</pre>
* Create a save directory for the kernel module
<pre>
=====> Input:
mkdir modules
</pre>
* Install kernel module to specified directory
<pre>
=====> Input:
make modules_install INSTALL_MOD_PATH=./modules

=====> Output:
INSTALL crypto/tcrypt.ko
INSTALL drivers/i2c/algos/i2c-algo-pca.ko
......
INSTALL sound/usb/snd-usbmidi-lib.ko
DEPMOD 3.14.52-myimx6-svn369
</pre>
* Package the kernel module files
<pre>
=====> Input:
tar cjf kernel-modules.tar.bz2 -C modules lib
</pre>
### Target File
**zImage、myimx6ek*.dtb and ernel-modules.tar.bz2 is the target file compiled and the three files are saved.**

 

## **Linux C Program compilation**
### Prepare source code
　　Open the disk to **5_MY-Demo -> MY-Linux-C-Demo**，download **hello.c** file and copy to virtual machine.
### Compile the target file
<pre>
=====> Input:
$CC hello.c -o hello.out
</pre>
**Note: If you have "no command found" information because the configuration of the cross-compilation tool chain is not effective, you can perform this step after pressing the "source tool chain profile" operation in the previous "cross compilation tool chain installation"**
### Run Linux C Target Program
* Copy the compiled hello.out to the development board
* Run the Linux C target program on the development board
<pre>
=====> Input:
chmod +x ./hello.out
./hello.out

=====> Output:
MYZR Technology Co.,Ltd.

Web: http://www.myzr.com.cn/
Wiki: http://wiki.myzr.com.cn/
BBS: http://bbs.myzr.com.cn/

Tel: 0756-3628023/3628021
E-mail: service@myzr.com.cn
</pre>

 

## **Linux QT5 program compilation**
### Prepare source code
　　Open the disk to **5_MY-Demo**，Download **MY-Linux-QT5-Demo-AboutUs-svn*.tar.bz2** file and copy to virtual machine.
<pre>
=====> Input:
tar xf MY-Linux-QT5-Demo-AboutUs-svn*.tar.bz2 -C ~/my-work/02_source/
</pre>
### QT Program compilation
* Enter source directory
<pre>
=====> Input:
cd ~/my-work/02_source/AboutUs/
</pre>
* Generate Makefile file
<pre>
=====> Input:
qmake
</pre>
**Note: If there is information that the 'qamke' command is not found because the configuration of the cross-compilation tool chain is not effective, you can perform this step after pressing the "source tool chain configuration file" operation in the previous "cross compilation tool chain installation"**
*Compile the target file
<pre>
=====> Input:
make

=====> Output:
/home/myzr/my-work/03_toolchain/fsl-imx-fb-glibc-x86_64-meta-toolchain-qt5-cortexa9hf-vfp-neon-toolchain-3.14.52-1.1.1/sysroots/x86_64-pokysdk-linux/usr/bin/qt5/uic widget.ui -o ui_widget.h
......
arm-poky-linux-gnueabi-g++ -march=armv7-a -mfloat-abi=hard -mfpu=neon -mtune=cortex-a9 --sysroot=/home/myzr/my-work/03_toolchain/fsl-imx-fb-glibc-x86_64-meta-toolchain-qt5-cortexa9hf-vfp-neon-toolchain-3.14.52-1.1.1/sysroots/cortexa9hf-vfp-neon-poky-linux-gnueabi -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed -Wl,-O1 -o AboutUs main.o widget.o qrc_source.o moc_widget.o -lQt5Widgets -lQt5Gui -lQt5Core -lGLESv2 -lEGL -lpthread
</pre>
### Run on MI-IMX6-A9 device
* Copy the compiled AboutUs to the development board
* Run QT5 target program on development board
<pre>
=====> Input:
chmod +x ./AboutUs
./AboutUs -platform eglfs
</pre>
### Running results
You can see that the MYZR logo and some information are output on the development board display.

 
--------------------------------------------------------------------------------
<pre>
--------------------------------------------------------------------------------
* ZhuHai MYZR Technology CO.,LTD.
* Latest Update: 2019/01/02
* Supporter: Tang Bin
--------------------------------------------------------------------------------
</pre>

←上一版本	2020年10月22日 (四) 05:55的版本
（没有差异）

@@ 第88行： / 第88行： @@
 【Note】： **myimx6ek200-6q-1g_defconfig** after **make** is changed to a configuration file corresponding to the development board model.
 <pre>
-********** MY-IMX6-EK200 **********
+********** MYZR-IMX6-EK200 **********
 myimx6ek200-6q-1g_defconfig     myimx6ek200-6q-2g_defconfig     myimx6ek200-6q-512m_defconfig
 myimx6ek200-6u-1g_defconfig     myimx6ek200-6u-2g_defconfig     myimx6ek200-6u-512m_defconfig
@@ 第94行： / 第94行： @@
 myimx6ek200-6qp-1g_defconfig    myimx6ek200-6qp-2g_defconfig    myimx6ek200-6qp-512m_defconfig
-********** MY-IMX6-EK314 **********
+********** MYZR-IMX6-EK314 **********
 myimx6ek314-6q-1g_defconfig     myimx6ek314-6q-2g_defconfig     myimx6ek314-6q-512m_defconfig
 myimx6ek314-6u-1g_defconfig     myimx6ek314-6u-2g_defconfig     myimx6ek314-6u-512m_defconfig
@@ 第100行： / 第100行： @@
 myimx6ek314-6qp-1g_defconfig    myimx6ek314-6qp-2g_defconfig    myimx6ek314-6qp-512m_defconfig
-********** MY-IMX6-EK336 **********
+********** MYZR-IMX6-EK336 **********
 myimx6ek336-6q-1g_defconfig     myimx6ek336-6q-2g_defconfig     myimx6ek336-6q-512m_defconfig
 </pre>
@@ 第219行： / 第219行： @@
 【Note】：The **myimx6ek200-6q-1g.dtb** after **make** is changed to the configuration file corresponding to the development board model.
 <pre>
-********** MY-IMX6-EK200 **********
+********** MYZR-IMX6-EK200 **********
 myimx6ek200-6q-1g.dtb     myimx6ek200-6q-2g.dtb     myimx6ek200-6q-512m.dtb
 myimx6ek200-6u-1g.dtb     myimx6ek200-6u-2g.dtb     myimx6ek200-6u-512m.dtb
@@ 第225行： / 第225行： @@
 myimx6ek200-6qp-1g.dtb    myimx6ek200-6qp-2g.dtb    myimx6ek200-6qp-512m.dtb
-********** MY-IMX6-EK314 **********
+********** MYZR-IMX6-EK314 **********
 myimx6ek314-6q-1g.dtb     myimx6ek314-6q-2g.dtb     myimx6ek314-6q-512m.dtb
 myimx6ek314-6u-1g.dtb     myimx6ek314-6u-2g.dtb     myimx6ek314-6u-512m.dtb
@@ 第231行： / 第231行： @@
 myimx6ek314-6qp-1g.dtb    myimx6ek314-6qp-2g.dtb    myimx6ek314-6qp-512m.dtb
-********** MY-IMX6-EK336 **********
+********** MYZR-IMX6-EK336 **********
 myimx6ek336-6q-1g.dtb     myimx6ek336-6q-2g.dtb     myimx6ek336-6q-512m.dtb
 </pre>

MYZR-IMX6-A9 Linux-3.14.52 Build Manual v2.0 - 版本历史

Admin：Admin移动页面MY-IMX6-A9 Linux-3.14.52 Build Manual v2.0至MYZR-IMX6-A9 Linux-3.14.52 Build Manual v2.0，不留重定向

2020年10月22日 (四) 05:55 Admin

Admin：创建页面，内容为“ [^_^]: MY-IMX6-A9 Linux-3.14.52 Build Reference Manual v2.0 ## **Download relevant documents** #### Cross-compile tool chain **A9 series**：Open the network...”

Admin：创建页面，内容为“ [^_^]: MY-IMX6-A9 Linux-3.14.52 Build Reference Manual v2.0 ## Download relevant documents #### Cross-compile tool chain 　　A9 series：Open the network...”