MYZR-IMX Linux-4.9.88 Build Manual - 版本历史

Admin：Admin移动页面MY-IMX Linux-4.9.88 Build Manual至MYZR-IMX Linux-4.9.88 Build Manual，不留重定向

2020-10-22T07:35:42Z

Admin移动页面MY-IMX Linux-4.9.88 Build Manual至MYZR-IMX Linux-4.9.88 Build Manual，不留重定向

2020年10月22日 (四) 07:35 Admin

2020-10-22T07:35:31Z

Admin：创建页面，内容为“ [^_^]: MY-IMX Linux-4.9.88 Build Reference Manual ## Necessary explanation 　　A7 series includes MY-IMX6-EK140、MY-IMX6-EK140P. 　　A9 series...”

2019-01-03T02:40:26Z

创建页面，内容为“ [^_^]: MY-IMX Linux-4.9.88 Build Reference Manual ## **Necessary explanation** 　　**A7 series** includes MY-IMX6-EK140、MY-IMX6-EK140P. 　　**A9 series**...”

新页面

[^_^]: MY-IMX Linux-4.9.88 Build Reference Manual

## **Necessary explanation**
　　**A7 series** includes MY-IMX6-EK140、MY-IMX6-EK140P.
　　**A9 series** includes MY-IMX6-EK200、MY-IMX6-EK314、MY-IMX6-EK336.

 

## **Download relevant files**
#### Cross-compile tool chain
　　**IMX8M**：Open the disk to **2.4_OS_Linux-4.9.88 -> 03_toolchain**，Download ** MY-IMX8M ** Directory.
　　**A7 series**：Open the network disk to**2.4_OS_Linux-4.9.88 -> 03_toolchain**，Download **MY-IMX-A7** Directory.
　　**A9 series**：Open the network disk to**2.4_OS_Linux-4.9.88 -> 03_toolchain**，Download **MY-IMX-A9** Directory.
#### Source code
　　**u-boot**：Open the network disk to **2.4_OS_Linux-4.9.88 -> 02_source**，Download **u-boot-2016.03-*.tar.bz2**.
　　**Kernel**：Open the network disk to **2.4_OS_Linux-4.9.88 -> 02_source**，Download **linux-4.9.88-*.tar.bz2**.

 

## **Install cross compilation tool chain**

### MY-IMX8M series cross compilation tool chain installation
**1. Execute installation**
<pre>
=====> Input:
./fsl-imx-xwayland-glibc-x86_64-meta-toolchain-qt5-aarch64-toolchain-4.9.88-2.0.0.sh

=====> Output:
NXP i.MX Release Distro SDK installer version 4.9.88-2.0.0
==========================================================
Enter target directory for SDK (default: /opt/fsl-imx-xwayland/4.9.88-2.0.0):
=====> Input:
/home/myzr/my-work/03_toolchain/fsl-imx-xwayland-glibc-x86_64-meta-toolchain-qt5-aarch64-toolchain-4.9.88-2.0.0

=====> Output:
You are about to install the SDK to "/home/myzr/my-work/03_toolchain/fsl-imx-xwayland-glibc-x86_64-meta-toolchain-qt5-aarch64-toolchain-4.9.88-2.0.0". Proceed[Y/n]?
=====> Input:
y

=====> Output:
Extracting SDK.......................................................................................................................................................................................................................done
Setting it up...done
SDK has been successfully set up and is ready to be used.
Each time you wish to use the SDK in a new shell session, you need to source the environment setup script e.g.
$ . /home/myzr/my-work/03_toolchain/fsl-imx-xwayland-glibc-x86_64-meta-toolchain-qt5-aarch64-toolchain-4.9.88-2.0.0/environment-setup-aarch64-poky-linux
</pre>

**2. source Toolchain Profile**
<pre>
=====> Input:
source /home/myzr/my-work/03_toolchain/fsl-imx-xwayland-glibc-x86_64-meta-toolchain-qt5-aarch64-toolchain-4.9.88-2.0.0/environment-setup-aarch64-poky-linux
</pre>
**3. Verify cross compilation tool installation**
<pre>
=====> Input:
$CC -v

=====> Output:
Using built-in specs.
COLLECT_GCC=aarch64-poky-linux-gcc
COLLECT_LTO_WRAPPER=/home/myzr/my-work/03_toolchain/fsl-imx-xwayland-glibc-x86_64-meta-toolchain-qt5-aarch64-toolchain-4.9.88-2.0.0/sysroots/x86_64-pokysdk-linux/usr/libexec/aarch64-poky-linux/gcc/aarch64-poky-linux/7.3.0/lto-wrapper
Target: aarch64-poky-linux
Configured with: ../../../../../../work-shared/gcc-7.3.0-r0/gcc-7.3.0/configure --build=x86_64-linux --host=x86_64-pokysdk-linux --target=aarch64-poky-linux --prefix=/opt/fsl-imx-xwayland/4.9.88-2.0.0/sysroots/x86_64-pokysdk-linux/usr --exec_prefix=/opt/fsl-imx-xwayland/4.9.88-2.0.0/sysroots/x86_64-pokysdk-linux/usr --bindir=/opt/fsl-imx-xwayland/4.9.88-2.0.0/sysroots/x86_64-pokysdk-linux/usr/bin/aarch64-poky-linux --sbindir=/opt/fsl-imx-xwayland/4.9.88-2.0.0/sysroots/x86_64-pokysdk-linux/usr/bin/aarch64-poky-linux --libexecdir=/opt/fsl-imx-xwayland/4.9.88-2.0.0/sysroots/x86_64-pokysdk-linux/usr/libexec/aarch64-poky-linux --datadir=/opt/fsl-imx-xwayland/4.9.88-2.0.0/sysroots/x86_64-pokysdk-linux/usr/share --sysconfdir=/opt/fsl-imx-xwayland/4.9.88-2.0.0/sysroots/x86_64-pokysdk-linux/etc --sharedstatedir=/opt/fsl-imx-xwayland/4.9.88-2.0.0/sysroots/x86_64-pokysdk-linux/com --localstatedir=/opt/fsl-imx-xwayland/4.9.88-2.0.0/sysroots/x86_64-pokysdk-linux/var --libdir=/opt/fsl-imx-xwayland/4.9.88-2.0.0/sysroots/x86_64-pokysdk-linux/usr/lib/aarch64-poky-linux --includedir=/opt/fsl-imx-xwayland/4.9.88-2.0.0/sysroots/x86_64-pokysdk-linux/usr/include --oldincludedir=/opt/fsl-imx-xwayland/4.9.88-2.0.0/sysroots/x86_64-pokysdk-linux/usr/include --infodir=/opt/fsl-imx-xwayland/4.9.88-2.0.0/sysroots/x86_64-pokysdk-linux/usr/share/info --mandir=/opt/fsl-imx-xwayland/4.9.88-2.0.0/sysroots/x86_64-pokysdk-linux/usr/share/man --disable-silent-rules --disable-dependency-tracking --with-libtool-sysroot=/home/myzr/my-work/imx-4.9.88-2.0.0_ga/imx8mqevk__fsl-imx-xwayland/tmp/work/x86_64-nativesdk-pokysdk-linux/gcc-cross-canadian-aarch64/7.3.0-r0/recipe-sysroot --with-gnu-ld --enable-shared --enable-languages=c,c++ --enable-threads=posix --enable-multilib --enable-c99 --enable-long-long --enable-symvers=gnu --enable-libstdcxx-pch --program-prefix=aarch64-poky-linux- --without-local-prefix --enable-lto --enable-libssp --enable-libitm --disable-bootstrap --disable-libmudflap --with-system-zlib --with-linker-hash-style=gnu --enable-linker-build-id --with-ppl=no --with-cloog=no --enable-checking=release --enable-cheaders=c_global --without-isl --with-gxx-include-dir=/not/exist/usr/include/c++/7.3.0 --with-build-time-tools=/home/myzr/my-work/imx-4.9.88-2.0.0_ga/imx8mqevk__fsl-imx-xwayland/tmp/work/x86_64-nativesdk-pokysdk-linux/gcc-cross-canadian-aarch64/7.3.0-r0/recipe-sysroot-native/usr/aarch64-poky-linux/bin --with-sysroot=/not/exist --with-build-sysroot=/home/myzr/my-work/imx-4.9.88-2.0.0_ga/imx8mqevk__fsl-imx-xwayland/tmp/work/x86_64-nativesdk-pokysdk-linux/gcc-cross-canadian-aarch64/7.3.0-r0/recipe-sysroot --without-long-double-128 --enable-poison-system-directories --with-mpfr=/home/myzr/my-work/imx-4.9.88-2.0.0_ga/imx8mqevk__fsl-imx-xwayland/tmp/work/x86_64-nativesdk-pokysdk-linux/gcc-cross-canadian-aarch64/7.3.0-r0/recipe-sysroot --with-mpc=/home/myzr/my-work/imx-4.9.88-2.0.0_ga/imx8mqevk__fsl-imx-xwayland/tmp/work/x86_64-nativesdk-pokysdk-linux/gcc-cross-canadian-aarch64/7.3.0-r0/recipe-sysroot --enable-nls --enable-initfini-array --enable-__cxa_atexit
Thread model: posix
gcc version 7.3.0 (GCC)
</pre>

### MY-IMX-A7 Series cross compilation tool chain installation
**1. Execute installation**
<pre>
=====> Input:
./fsl-imx-x11-glibc-x86_64-meta-toolchain-qt5-cortexa7hf-neon-toolchain-4.9.88-2.0.0.sh

=====> Output:
NXP i.MX Release Distro SDK installer version 4.9.88-2.0.0
==========================================================
Enter target directory for SDK (default: /opt/fsl-imx-x11/4.9.88-2.0.0):
=====> Input:
/home/myzr/my-work/03_toolchain/fsl-imx-x11-glibc-x86_64-meta-toolchain-qt5-cortexa7hf-neon-toolchain-4.9.88-2.0.0

=====> Output:
You are about to install the SDK to "/home/myzr/my-work/03_toolchain/fsl-imx-x11-glibc-x86_64-meta-toolchain-qt5-cortexa7hf-neon-toolchain-4.9.88-2.0.0". Proceed[Y/n]?
=====> Input:
y

=====> Output:
Extracting SDK....................................................................................................................................................................................................done
Setting it up...done
SDK has been successfully set up and is ready to be used.
Each time you wish to use the SDK in a new shell session, you need to source the environment setup script e.g.
$ . /home/myzr/my-work/03_toolchain/fsl-imx-x11-glibc-x86_64-meta-toolchain-qt5-cortexa7hf-neon-toolchain-4.9.88-2.0.0/environment-setup-cortexa7hf-neon-poky-linux-gnueabi
</pre>

**2. source Toolchain Profile**
<pre>
=====> Input:
source /home/myzr/my-work/03_toolchain/fsl-imx-x11-glibc-x86_64-meta-toolchain-qt5-cortexa7hf-neon-toolchain-4.9.88-2.0.0/environment-setup-cortexa7hf-neon-poky-linux-gnueabi
</pre>
**3. Verify cross compilation tool installation**
<pre>
=====> Input:
$CC -v

=====> Output:
Using built-in specs.
COLLECT_GCC=arm-poky-linux-gnueabi-gcc
COLLECT_LTO_WRAPPER=/home/myzr/my-work/03_toolchain/fsl-imx-x11-glibc-x86_64-meta-toolchain-qt5-cortexa7hf-neon-toolchain-4.9.88-2.0.0/sysroots/x86_64-pokysdk-linux/usr/libexec/arm-poky-linux-gnueabi/gcc/arm-poky-linux-gnueabi/7.3.0/lto-wrapper
Target: arm-poky-linux-gnueabi
Configured with: ../../../../../../work-shared/gcc-7.3.0-r0/gcc-7.3.0/configure --build=x86_64-linux --host=x86_64-pokysdk-linux --target=arm-poky-linux-gnueabi --prefix=/opt/fsl-imx-x11/4.9.88-2.0.0/sysroots/x86_64-pokysdk-linux/usr --exec_prefix=/opt/fsl-imx-x11/4.9.88-2.0.0/sysroots/x86_64-pokysdk-linux/usr --bindir=/opt/fsl-imx-x11/4.9.88-2.0.0/sysroots/x86_64-pokysdk-linux/usr/bin/arm-poky-linux-gnueabi --sbindir=/opt/fsl-imx-x11/4.9.88-2.0.0/sysroots/x86_64-pokysdk-linux/usr/bin/arm-poky-linux-gnueabi --libexecdir=/opt/fsl-imx-x11/4.9.88-2.0.0/sysroots/x86_64-pokysdk-linux/usr/libexec/arm-poky-linux-gnueabi --datadir=/opt/fsl-imx-x11/4.9.88-2.0.0/sysroots/x86_64-pokysdk-linux/usr/share --sysconfdir=/opt/fsl-imx-x11/4.9.88-2.0.0/sysroots/x86_64-pokysdk-linux/etc --sharedstatedir=/opt/fsl-imx-x11/4.9.88-2.0.0/sysroots/x86_64-pokysdk-linux/com --localstatedir=/opt/fsl-imx-x11/4.9.88-2.0.0/sysroots/x86_64-pokysdk-linux/var --libdir=/opt/fsl-imx-x11/4.9.88-2.0.0/sysroots/x86_64-pokysdk-linux/usr/lib/arm-poky-linux-gnueabi --includedir=/opt/fsl-imx-x11/4.9.88-2.0.0/sysroots/x86_64-pokysdk-linux/usr/include --oldincludedir=/opt/fsl-imx-x11/4.9.88-2.0.0/sysroots/x86_64-pokysdk-linux/usr/include --infodir=/opt/fsl-imx-x11/4.9.88-2.0.0/sysroots/x86_64-pokysdk-linux/usr/share/info --mandir=/opt/fsl-imx-x11/4.9.88-2.0.0/sysroots/x86_64-pokysdk-linux/usr/share/man --disable-silent-rules --disable-dependency-tracking --with-libtool-sysroot=/home/myzr/my-work/imx-4.9.88-2.0.0_ga/imx6ul7d__fsl-imx-x11/tmp/work/x86_64-nativesdk-pokysdk-linux/gcc-cross-canadian-arm/7.3.0-r0/recipe-sysroot --with-gnu-ld --enable-shared --enable-languages=c,c++ --enable-threads=posix --enable-multilib --enable-c99 --enable-long-long --enable-symvers=gnu --enable-libstdcxx-pch --program-prefix=arm-poky-linux-gnueabi- --without-local-prefix --enable-lto --enable-libssp --enable-libitm --disable-bootstrap --disable-libmudflap --with-system-zlib --with-linker-hash-style=gnu --enable-linker-build-id --with-ppl=no --with-cloog=no --enable-checking=release --enable-cheaders=c_global --without-isl --with-gxx-include-dir=/not/exist/usr/include/c++/7.3.0 --with-build-time-tools=/home/myzr/my-work/imx-4.9.88-2.0.0_ga/imx6ul7d__fsl-imx-x11/tmp/work/x86_64-nativesdk-pokysdk-linux/gcc-cross-canadian-arm/7.3.0-r0/recipe-sysroot-native/usr/arm-poky-linux-gnueabi/bin --with-sysroot=/not/exist --with-build-sysroot=/home/myzr/my-work/imx-4.9.88-2.0.0_ga/imx6ul7d__fsl-imx-x11/tmp/work/x86_64-nativesdk-pokysdk-linux/gcc-cross-canadian-arm/7.3.0-r0/recipe-sysroot --without-long-double-128 --enable-poison-system-directories --with-mpfr=/home/myzr/my-work/imx-4.9.88-2.0.0_ga/imx6ul7d__fsl-imx-x11/tmp/work/x86_64-nativesdk-pokysdk-linux/gcc-cross-canadian-arm/7.3.0-r0/recipe-sysroot --with-mpc=/home/myzr/my-work/imx-4.9.88-2.0.0_ga/imx6ul7d__fsl-imx-x11/tmp/work/x86_64-nativesdk-pokysdk-linux/gcc-cross-canadian-arm/7.3.0-r0/recipe-sysroot --enable-nls --enable-initfini-array
Thread model: posix
gcc version 7.3.0 (GCC)
</pre>

### MY-IMX-A9 series cross compilation tool chain installation
**1. Execute installation**
<pre>
=====> Input:
./fsl-imx-fb-glibc-x86_64-meta-toolchain-qt5-cortexa9hf-neon-toolchain-4.9.88-2.0.0.sh

=====> Output:
NXP i.MX Release Distro SDK installer version 4.9.88-2.0.0
==========================================================
Enter target directory for SDK (default: /opt/fsl-imx-x11/4.9.88-2.0.0):
=====> Input:
/home/myzr/my-work/03_toolchain/fsl-imx-fb-glibc-x86_64-meta-toolchain-qt5-cortexa9hf-neon-toolchain-4.9.88-2.0.0

=====> Output:
You are about to install the SDK to "/home/myzr/my-work/03_toolchain/fsl-imx-fb-glibc-x86_64-meta-toolchain-qt5-cortexa9hf-neon-toolchain-4.9.88-2.0.0
". Proceed[Y/n]?
=====> Input:
y

=====> Output:
Extracting SDK..................................................................................................................................................................................................done
Setting it up...done
SDK has been successfully set up and is ready to be used.
Each time you wish to use the SDK in a new shell session, you need to source the environment setup script e.g.
$ . /home/myzr/my-work/03_toolchain/fsl-imx-fb-glibc-x86_64-meta-toolchain-qt5-cortexa9hf-neon-toolchain-4.9.88-2.0.0/environment-setup-cortexa9hf-neon-poky-linux-gnueabi
</pre>

**2. source Toolchain Profile**
<pre>
=====> Input:
source /home/myzr/my-work/03_toolchain/fsl-imx-fb-glibc-x86_64-meta-toolchain-qt5-cortexa9hf-neon-toolchain-4.9.88-2.0.0/environment-setup-cortexa9hf-neon-poky-linux-gnueabi
</pre>
**3. Verify cross compilation tool installation**
<pre>
=====> Input:
$CC -v

=====> Output:
Using built-in specs.
COLLECT_GCC=arm-poky-linux-gnueabi-gcc
COLLECT_LTO_WRAPPER=/home/myzr/my-work/03_toolchain/fsl-imx-fb-glibc-x86_64-meta-toolchain-qt5-cortexa9hf-neon-toolchain-4.9.88-2.0.0/sysroots/x86_64-pokysdk-linux/usr/libexec/arm-poky-linux-gnueabi/gcc/arm-poky-linux-gnueabi/7.3.0/lto-wrapper
Target: arm-poky-linux-gnueabi
Configured with: ../../../../../../work-shared/gcc-7.3.0-r0/gcc-7.3.0/configure --build=x86_64-linux --host=x86_64-pokysdk-linux --target=arm-poky-linux-gnueabi --prefix=/opt/fsl-imx-fb/4.9.88-2.0.0/sysroots/x86_64-pokysdk-linux/usr --exec_prefix=/opt/fsl-imx-fb/4.9.88-2.0.0/sysroots/x86_64-pokysdk-linux/usr --bindir=/opt/fsl-imx-fb/4.9.88-2.0.0/sysroots/x86_64-pokysdk-linux/usr/bin/arm-poky-linux-gnueabi --sbindir=/opt/fsl-imx-fb/4.9.88-2.0.0/sysroots/x86_64-pokysdk-linux/usr/bin/arm-poky-linux-gnueabi --libexecdir=/opt/fsl-imx-fb/4.9.88-2.0.0/sysroots/x86_64-pokysdk-linux/usr/libexec/arm-poky-linux-gnueabi --datadir=/opt/fsl-imx-fb/4.9.88-2.0.0/sysroots/x86_64-pokysdk-linux/usr/share --sysconfdir=/opt/fsl-imx-fb/4.9.88-2.0.0/sysroots/x86_64-pokysdk-linux/etc --sharedstatedir=/opt/fsl-imx-fb/4.9.88-2.0.0/sysroots/x86_64-pokysdk-linux/com --localstatedir=/opt/fsl-imx-fb/4.9.88-2.0.0/sysroots/x86_64-pokysdk-linux/var --libdir=/opt/fsl-imx-fb/4.9.88-2.0.0/sysroots/x86_64-pokysdk-linux/usr/lib/arm-poky-linux-gnueabi --includedir=/opt/fsl-imx-fb/4.9.88-2.0.0/sysroots/x86_64-pokysdk-linux/usr/include --oldincludedir=/opt/fsl-imx-fb/4.9.88-2.0.0/sysroots/x86_64-pokysdk-linux/usr/include --infodir=/opt/fsl-imx-fb/4.9.88-2.0.0/sysroots/x86_64-pokysdk-linux/usr/share/info --mandir=/opt/fsl-imx-fb/4.9.88-2.0.0/sysroots/x86_64-pokysdk-linux/usr/share/man --disable-silent-rules --disable-dependency-tracking --with-libtool-sysroot=/home/myzr/my-work/imx-4.9.88-2.0.0_ga/imx6qpdlsolox__fsl-imx-fb/tmp/work/x86_64-nativesdk-pokysdk-linux/gcc-cross-canadian-arm/7.3.0-r0/recipe-sysroot --with-gnu-ld --enable-shared --enable-languages=c,c++ --enable-threads=posix --enable-multilib --enable-c99 --enable-long-long --enable-symvers=gnu --enable-libstdcxx-pch --program-prefix=arm-poky-linux-gnueabi- --without-local-prefix --enable-lto --enable-libssp --enable-libitm --disable-bootstrap --disable-libmudflap --with-system-zlib --with-linker-hash-style=gnu --enable-linker-build-id --with-ppl=no --with-cloog=no --enable-checking=release --enable-cheaders=c_global --without-isl --with-gxx-include-dir=/not/exist/usr/include/c++/7.3.0 --with-build-time-tools=/home/myzr/my-work/imx-4.9.88-2.0.0_ga/imx6qpdlsolox__fsl-imx-fb/tmp/work/x86_64-nativesdk-pokysdk-linux/gcc-cross-canadian-arm/7.3.0-r0/recipe-sysroot-native/usr/arm-poky-linux-gnueabi/bin --with-sysroot=/not/exist --with-build-sysroot=/home/myzr/my-work/imx-4.9.88-2.0.0_ga/imx6qpdlsolox__fsl-imx-fb/tmp/work/x86_64-nativesdk-pokysdk-linux/gcc-cross-canadian-arm/7.3.0-r0/recipe-sysroot --without-long-double-128 --enable-poison-system-directories --with-mpfr=/home/myzr/my-work/imx-4.9.88-2.0.0_ga/imx6qpdlsolox__fsl-imx-fb/tmp/work/x86_64-nativesdk-pokysdk-linux/gcc-cross-canadian-arm/7.3.0-r0/recipe-sysroot --with-mpc=/home/myzr/my-work/imx-4.9.88-2.0.0_ga/imx6qpdlsolox__fsl-imx-fb/tmp/work/x86_64-nativesdk-pokysdk-linux/gcc-cross-canadian-arm/7.3.0-r0/recipe-sysroot --enable-nls --enable-initfini-array
Thread model: posix
gcc version 7.3.0 (GCC)
</pre>

 

## **U-book compilation**
　　**Description**：MY-IMX8M does not need to compile this u-book.
###
Preparation before compilation

* Create a compile working directory

<pre>
=====> Input:
mkdir ~/my-work/02_source/ -p
</pre>
* Unpack source code to working directory
<pre>
=====> Input:
tar xf u-boot-2016.03-svn*.tar.bz2 -C ~/my-work/02_source/
</pre>

### Compilation of u-book target files
* Enter source directory
<pre>
=====> Input:
cd ~/my-work/02_source/u-boot-2016.03
</pre>
* Generate the target development board ”. config“ file
<pre>
=====> Input:
make myimx6ek140p-6y-256m-emmc_defconfig

=====> Output:
HOSTCC scripts/basic/fixdep
HOSTCC scripts/kconfig/conf.o
SHIPPED scripts/kconfig/zconf.tab.c
SHIPPED scripts/kconfig/zconf.lex.c
SHIPPED scripts/kconfig/zconf.hash.c
HOSTCC scripts/kconfig/zconf.tab.o
HOSTLD scripts/kconfig/conf
#
# configuration written to .config
#
</pre>
【Note】： **myimx 6ek140p-6y-256m-emmc_defconfig** after **make** is changed to a configuration file corresponding to the development board model.
<pre>
********** MY-IMX6-EK140 **********
myimx6ek140-6g-128m-emmc_defconfig myimx6ek140-6y-128m-emmc_defconfig
myimx6ek140-6g-128m-nand_defconfig myimx6ek140-6y-128m-nand_defconfig
myimx6ek140-6g-256m-emmc_defconfig myimx6ek140-6y-256m-emmc_defconfig
myimx6ek140-6g-256m-nand_defconfig myimx6ek140-6y-256m-nand_defconfig
myimx6ek140-6g-512m-emmc_defconfig myimx6ek140-6y-512m-emmc_defconfig
myimx6ek140-6g-512m-nand_defconfig myimx6ek140-6y-512m-nand_defconfig

********** MY-IMX6-EK140P **********
myimx6ek140p-6g-128m-emmc_defconfig myimx6ek140p-6y-128m-emmc_defconfig
myimx6ek140p-6g-128m-nand_defconfig myimx6ek140p-6y-128m-nand_defconfig
myimx6ek140p-6g-256m-emmc_defconfig myimx6ek140p-6y-256m-emmc_defconfig
myimx6ek140p-6g-256m-nand_defconfig myimx6ek140p-6y-256m-nand_defconfig
myimx6ek140p-6g-512m-emmc_defconfig myimx6ek140p-6y-512m-emmc_defconfig
myimx6ek140p-6g-512m-nand_defconfig myimx6ek140p-6y-512m-nand_defconfig

********** MY-IMX6-EK200 **********
myimx6ek200-6q-1g_defconfig myimx6ek200-6q-2g_defconfig myimx6ek200-6q-512m_defconfig
myimx6ek200-6u-1g_defconfig myimx6ek200-6u-2g_defconfig myimx6ek200-6u-512m_defconfig
myimx6ek200-6s-512m_defconfig myimx6ek200-6s-1g_defconfig myimx6ek200-6s-128m_defconfig
myimx6ek200-6qp-1g_defconfig myimx6ek200-6qp-2g_defconfig myimx6ek200-6qp-512m_defconfig

********** MY-IMX6-EK314 **********
myimx6ek314-6q-1g_defconfig myimx6ek314-6q-2g_defconfig myimx6ek314-6q-512m_defconfig
myimx6ek314-6u-1g_defconfig myimx6ek314-6u-2g_defconfig myimx6ek314-6u-512m_defconfig
myimx6ek314-6s-512m_defconfig myimx6ek314-6s-1g_defconfig myimx6ek314-6s-128m_defconfig
myimx6ek314-6qp-1g_defconfig myimx6ek314-6qp-2g_defconfig myimx6ek314-6qp-512m_defconfig

********** MY-IMX6-EK336 **********
myimx6ek336-6q-1g_defconfig myimx6ek336-6q-2g_defconfig myimx6ek336-6q-512m_defconfig
</pre>

* Compiling
<pre>
=====> Input:
make

=====> Output:
scripts/kconfig/conf --silentoldconfig Kconfig
CHK include/config.h
UPD include/config.h
GEN include/autoconf.mk
GEN include/autoconf.mk.dep
CHK include/config/uboot.release
CHK include/generated/timestamp_autogenerated.h
CFG u-boot.cfg
......
LD u-boot
OBJCOPY u-boot-nodtb.bin
OBJCOPY u-boot.srec
SYM u-boot.sym
COPY u-boot.bin
CFGS board/myzr/myimx6/myimx6a7-6y-ddr3.cfg.cfgtmp
MKIMAGE u-boot.imx
</pre>
**Note: If there's a hint “cc1: error”，Usually the configuration of the cross-compilation tool does not work, and you can perform this step after pressing the "source toolchain configuration file" operation in the previous "cross compilation tool chain installation".**

* u-boot Target File
**u-boot.imx** is the target file.

### Compile U-boot environment variable scripts
<pre>
=====> Input:
mkimage -A arm -O linux -T script -C none -a 0 -e 0 -n "myzr bootscripts" -d board/myzr/bootscripts/myimx6a7_l4988_emmc_script.cmd my_environment_emmc.scr

=====> Output:
Image Name: myzr bootscripts
Created: Wed Jan 2 09:41:00 2019
Image Type: ARM Linux Script (uncompressed)
Data Size: 1450 Bytes = 1.42 kB = 0.00 MB
Load Address: 00000000
Entry Point: 00000000
Contents:
Image 0: 1442 Bytes = 1.41 kB = 0.00 MB
</pre>

### Target File
**"u-boot.imx "and "my_environment_emmc.scr" That is, the compiled target files, save the two files**

 
## **Kernel compilation**
### Preparation before compilation
* Create a compile working directory
<pre>
=====> Input:
mkdir ~/my-work/02_source/ -p
</pre>
* Unpack source code to working directory
<pre>
=====> Input:
tar xf linux-4.9.88-svn*.tar.bz2 -C ~/my-work/02_source/
</pre>

### Compiles kernel target files
* Enter the kernel source directory
<pre>
=====> Input:
cd ~/my-work/02_source/linux-4.9.88
</pre>
* To generate the target platform .config file
<pre>
=====> Input:
make myimx6a7_defconfig

=====> Output:
HOSTCC scripts/basic/fixdep
HOSTCC scripts/kconfig/conf.o
SHIPPED scripts/kconfig/zconf.tab.c
SHIPPED scripts/kconfig/zconf.lex.c
SHIPPED scripts/kconfig/zconf.hash.c
HOSTCC scripts/kconfig/zconf.tab.o
HOSTLD scripts/kconfig/conf
#
# configuration written to .config
#
</pre>
**Note: If there is an error in “Can't find default configuration "arch/x86/configs” ，because the configuration of the cross compilation tool chain did not work，you can press "Source Toolchain Profile" in the previous "Cross Compiler Toolchain Installation" to perform this step after one operation **
【Note】：**myimx6a7_defconfig** after **make** is changed to a configuration file corresponding to the development board model.
<pre>
********** MY-IMX6-EK140、MY-IMX6-EK140P **********
myimx6a7_defconfig

********** MY-IMX6-EK200、MY-IMX6-EK314、MY-IMX6-EK336 **********
myimx6a9_defconfig

********** MY-IMX8M-EK314 **********
my_defconfig
</pre>

* Compiles kernel target files
<pre>
=====> Input:
make zImage

=====> Output:
scripts/kconfig/conf --silentoldconfig Kconfig
CHK include/config/kernel.release
UPD include/config/kernel.release
WRAP arch/arm/include/generated/asm/bitsperlong.h
......
AS arch/arm/boot/compressed/piggy.o
LD arch/arm/boot/compressed/vmlinux
OBJCOPY arch/arm/boot/zImage
Kernel: arch/arm/boot/zImage is ready
</pre>
* Kernel target file
**arch/arm/boot/zImage** is the kernel target file

### Build Device Tree Target File
* Execute compile command
<pre>
=====> Input:
make myimx6ek140p-6y-256m-emmc.dtb

=====> Output:
DTC arch/arm/boot/dts/myimx6ek140p-6y-256m-emmc.dtb
</pre>
【Note】：The **myimx 6ek140p-6y-256m-emmc. dtb** after **make** is changed to the configuration file corresponding to the development board model.
<pre>
********** MY-IMX6-EK140 **********
myimx6ek140-6g-128m-emmc.dtb myimx6ek140-6y-128m-emmc.dtb
myimx6ek140-6g-128m-nand.dtb myimx6ek140-6y-128m-nand.dtb
myimx6ek140-6g-256m-emmc.dtb myimx6ek140-6y-256m-emmc.dtb
myimx6ek140-6g-256m-nand.dtb myimx6ek140-6y-256m-nand.dtb
myimx6ek140-6g-512m-emmc.dtb myimx6ek140-6y-512m-emmc.dtb
myimx6ek140-6g-512m-nand.dtb myimx6ek140-6y-512m-nand.dtb

********** MY-IMX6-EK140P **********
myimx6ek140p-6g-128m-emmc.dtb myimx6ek140p-6y-128m-emmc.dtb
myimx6ek140p-6g-128m-nand.dtb myimx6ek140p-6y-128m-nand.dtb
myimx6ek140p-6g-256m-emmc.dtb myimx6ek140p-6y-256m-emmc.dtb
myimx6ek140p-6g-256m-nand.dtb myimx6ek140p-6y-256m-nand.dtb
myimx6ek140p-6g-512m-emmc.dtb myimx6ek140p-6y-512m-emmc.dtb
myimx6ek140p-6g-512m-nand.dtb myimx6ek140p-6y-512m-nand.dtb

********** MY-IMX6-EK200 **********
myimx6ek200-6q-1g.dtb myimx6ek200-6q-2g.dtb myimx6ek200-6q-512m.dtb
myimx6ek200-6u-1g.dtb myimx6ek200-6u-2g.dtb myimx6ek200-6u-512m.dtb
myimx6ek200-6s-512m.dtb myimx6ek200-6s-1g.dtb myimx6ek200-6s-128m.dtb
myimx6ek200-6qp-1g.dtb myimx6ek200-6qp-2g.dtb myimx6ek200-6qp-512m.dtb

********** MY-IMX6-EK314 **********
myimx6ek314-6q-1g.dtb myimx6ek314-6q-2g.dtb myimx6ek314-6q-512m.dtb
myimx6ek314-6u-1g.dtb myimx6ek314-6u-2g.dtb myimx6ek314-6u-512m.dtb
myimx6ek314-6s-512m.dtb myimx6ek314-6s-1g.dtb myimx6ek314-6s-128m.dtb
myimx6ek314-6qp-1g.dtb myimx6ek314-6qp-2g.dtb myimx6ek314-6qp-512m.dtb

********** MY-IMX6-EK336 **********
myimx6ek336-6q-1g.dtb myimx6ek336-6q-2g.dtb myimx6ek336-6q-512m.dtb
</pre>

* Copy the device tree target file
<pre>
=====> Input:
cp arch/arm/boot/dts/myimx6ek140p-6y-256m-emmc.dtb ./
</pre>

### Build kernel module package
* Compiling
<pre>
=====> Input:
make modules

=====> Output:
CHK include/config/kernel.release
CHK include/generated/uapi/linux/version.h
......
LD [M] sound/usb/snd-usb-audio.ko
LD [M] sound/usb/snd-usbmidi-lib.ko
</pre>
* Create a save directory for the kernel module
<pre>
=====> Input:
mkdir modules
</pre>
* Install kernel module to specified directory
<pre>
=====> Input:
make modules_install INSTALL_MOD_PATH=./modules

=====> Output:
INSTALL crypto/echainiv.ko
INSTALL crypto/tcrypt.ko
......
INSTALL sound/usb/snd-usb-audio.ko
INSTALL sound/usb/snd-usbmidi-lib.ko
DEPMOD 4.9.88-myimx6-svn439
</pre>
* Package the kernel module files
<pre>
=====> Input:
tar cjf kernel-modules.tar.bz2 -C modules lib
</pre>
### Target File
**"zImage、myimx6ek*.dtb" and "kernel-modules.tar.bz2 "is the target file compiled and the three files are saved.**

 

## **Linux C Program compilation**
### Prepare source code
　　Open the disk to **5_MY-Demo -> MY-Linux-C-Demo**，download **hello.c** file and copy to virtual machine.
### Compile the target file
<pre>
=====> Input:
$CC hello.c -o hello.out
</pre>
**【Note】: If you have "no command found" information because the configuration of the cross-compilation tool chain is not effective, you can perform this step after pressing the "source tool chain profile" operation in the previous "cross compilation tool chain installation"**
### Run Linux C Target Program
* Copy the compiled hello.out to the development board
* Run the Linux C target program on the development board
<pre>
=====> Input:
chmod +x ./hello.out
./hello.out

=====> Output:
MYZR Technology Co.,Ltd.

Web: http://www.myzr.com.cn/
Wiki: http://wiki.myzr.com.cn/
BBS: http://bbs.myzr.com.cn/

Tel: 0756-3628023/3628021
E-mail: service@myzr.com.cn
</pre>

 

## **Linux QT5 program compilation**
### Prepare source code
　　Open the disk to **5_MY-Demo**，Download **MY-Linux-QT5-Demo-AboutUs-svn*.tar.bz2** file and copy to virtual machine.
* Unzip the source package to the working directory
<pre>
=====> Input:
tar xf MY-Linux-QT5-Demo-AboutUs-svn*.tar.bz2 -C ~/my-work/02_source/
</pre>
### QT Program compilation
* Enter source directory
<pre>
=====> Input:
cd ~/my-work/02_source/AboutUs/
</pre>
* Generate Makefile file
<pre>
=====> Input:
qmake

=====> Output:
Info: creating stash file /home/myzr/my-work/02_source/AboutUs/.qmake.stash
</pre>
**【Note】: If there is information that the 'qamke' command is not found because the configuration of the cross-compilation tool chain is not effective, you can perform this step after pressing the "source tool chain configuration file" operation in the previous "cross compilation tool chain installation"**
*Compile the target file
<pre>
=====> Input:
make

=====> Output:
/home/myzr/my-work/03_toolchain/fsl-imx-x11-glibc-x86_64-meta-toolchain-qt5-cortexa7hf-neon-toolchain-4.9.88-2.0.0/sysroots/x86_64-pokysdk-linux/usr/bin/qt5/uic widget.ui -o ui_widget.h
......
arm-poky-linux-gnueabi-g++ -march=armv7ve -mfpu=neon -mfloat-abi=hard -mcpu=cortex-a7 --sysroot=/home/myzr/my-work/03_toolchain/fsl-imx-x11-glibc-x86_64-meta-toolchain-qt5-cortexa7hf-neon-toolchain-4.9.88-2.0.0/sysroots/cortexa7hf-neon-poky-linux-gnueabi -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed --sysroot=/home/myzr/my-work/03_toolchain/fsl-imx-x11-glibc-x86_64-meta-toolchain-qt5-cortexa7hf-neon-toolchain-4.9.88-2.0.0/sysroots/cortexa7hf-neon-poky-linux-gnueabi -Wl,-O1 -o AboutUs main.o widget.o qrc_source.o moc_widget.o -lQt5Widgets -lQt5Gui -lQt5Core -lGLESv2 -lpthread
</pre>
### Run on MI-IMX6-A9 device
* Copy the compiled AboutUs to the development board
* Run QT5 target program on development board
<pre>
=====> Input:
chmod +x ./AboutUs
./AboutUs -platform eglfs
</pre>
### Run on the my-imx6-a7 device
* Copy the compiled AboutUs to the development board
* Run QT5 target program on development board
<pre>
=====> Input:
export DISPLAY=:0.0
chmod +x AboutUs
./AboutUs
</pre>
### Running results
You can see that the MYZR logo and some information are output on the development board display.

 
 

--------------------------------------------------------------------------------
<pre>
--------------------------------------------------------------------------------
* ZhuHai MYZR Technology CO.,LTD.
* Latest Update: 2019/01/02
* Supporter: Tang Bin
--------------------------------------------------------------------------------
</pre>

←上一版本	2020年10月22日 (四) 07:35的版本
（没有差异）

@@ 第3行： / 第3行： @@
 ## **Necessary explanation**
-　　**A7 series** includes MY-IMX6-EK140、MY-IMX6-EK140P.
+　　**A7 series** includes MYZR-IMX6-EK140、MYZR-IMX6-EK140P.
-　　**A9 series** includes MY-IMX6-EK200、MY-IMX6-EK314、MY-IMX6-EK336.
+　　**A9 series** includes MYZR-IMX6-EK200、MYZR-IMX6-EK314、MYZR-IMX6-EK336.
 <br/>
@@ 第10行： / 第10行： @@
 ## **Download relevant files**
 #### Cross-compile tool chain
-　　**IMX8M**：Open the disk to **2.4_OS_Linux-4.9.88 -> 03_toolchain**，Download ** MY-IMX8M ** Directory.
+　　**IMX8M**：Open the disk to **2.4_OS_Linux-4.9.88 -> 03_toolchain**，Download ** MYZR-IMX8M ** Directory.
-　　**A7 series**：Open the network disk to**2.4_OS_Linux-4.9.88 -> 03_toolchain**，Download  **MY-IMX-A7** Directory.
+　　**A7 series**：Open the network disk to**2.4_OS_Linux-4.9.88 -> 03_toolchain**，Download  **MYZR-IMX-A7** Directory.
-　　**A9 series**：Open the network disk to**2.4_OS_Linux-4.9.88 -> 03_toolchain**，Download  **MY-IMX-A9** Directory.
+　　**A9 series**：Open the network disk to**2.4_OS_Linux-4.9.88 -> 03_toolchain**，Download  **MYZR-IMX-A9** Directory.
 #### Source code
 　　**u-boot**：Open the network disk to **2.4_OS_Linux-4.9.88 -> 02_source**，Download  **u-boot-2016.03-*.tar.bz2**.
@@ 第21行： / 第21行： @@
 ## **Install cross compilation tool chain**
-### MY-IMX8M series cross compilation tool chain installation
+### MYZR-IMX8M series cross compilation tool chain installation
 **1. Execute installation**
 <pre>
@@ 第68行： / 第68行： @@
-### MY-IMX-A7 Series cross compilation tool chain installation
+### MYZR-IMX-A7 Series cross compilation tool chain installation
 **1. Execute installation**
 <pre>
@@ 第115行： / 第115行： @@
-### MY-IMX-A9 series cross compilation tool chain installation
+### MYZR-IMX-A9 series cross compilation tool chain installation
 **1. Execute installation**
 <pre>
@@ 第165行： / 第165行： @@
 ## **U-book compilation**
-　　**Description**：MY-IMX8M does not need to compile this u-book.
+　　**Description**：MYZR-IMX8M does not need to compile this u-book.
 ###
 Preparation before compilation
@@ 第206行： / 第206行： @@
 【Note】： **myimx 6ek140p-6y-256m-emmc_defconfig** after **make** is changed to a configuration file corresponding to the development board model.
 <pre>
-********** MY-IMX6-EK140 **********
+********** MYZR-IMX6-EK140 **********
 myimx6ek140-6g-128m-emmc_defconfig  myimx6ek140-6y-128m-emmc_defconfig
 myimx6ek140-6g-128m-nand_defconfig  myimx6ek140-6y-128m-nand_defconfig
@@ 第214行： / 第214行： @@
 myimx6ek140-6g-512m-nand_defconfig  myimx6ek140-6y-512m-nand_defconfig
-********** MY-IMX6-EK140P **********
+********** MYZR-IMX6-EK140P **********
 myimx6ek140p-6g-128m-emmc_defconfig  myimx6ek140p-6y-128m-emmc_defconfig
 myimx6ek140p-6g-128m-nand_defconfig  myimx6ek140p-6y-128m-nand_defconfig
@@ 第222行： / 第222行： @@
 myimx6ek140p-6g-512m-nand_defconfig  myimx6ek140p-6y-512m-nand_defconfig
-********** MY-IMX6-EK200 **********
+********** MYZR-IMX6-EK200 **********
 myimx6ek200-6q-1g_defconfig     myimx6ek200-6q-2g_defconfig     myimx6ek200-6q-512m_defconfig
 myimx6ek200-6u-1g_defconfig     myimx6ek200-6u-2g_defconfig     myimx6ek200-6u-512m_defconfig
@@ 第228行： / 第228行： @@
 myimx6ek200-6qp-1g_defconfig    myimx6ek200-6qp-2g_defconfig    myimx6ek200-6qp-512m_defconfig
-********** MY-IMX6-EK314 **********
+********** MYZR-IMX6-EK314 **********
 myimx6ek314-6q-1g_defconfig     myimx6ek314-6q-2g_defconfig     myimx6ek314-6q-512m_defconfig
 myimx6ek314-6u-1g_defconfig     myimx6ek314-6u-2g_defconfig     myimx6ek314-6u-512m_defconfig
@@ 第234行： / 第234行： @@
 myimx6ek314-6qp-1g_defconfig    myimx6ek314-6qp-2g_defconfig    myimx6ek314-6qp-512m_defconfig
-********** MY-IMX6-EK336 **********
+********** MYZR-IMX6-EK336 **********
 myimx6ek336-6q-1g_defconfig     myimx6ek336-6q-2g_defconfig     myimx6ek336-6q-512m_defconfig
 </pre>
@@ 第325行： / 第325行： @@
 【Note】：**myimx6a7_defconfig** after **make** is changed to a configuration file corresponding to the development board model.
 <pre>
-********** MY-IMX6-EK140、MY-IMX6-EK140P **********
+********** MYZR-IMX6-EK140、MYZR-IMX6-EK140P **********
 myimx6a7_defconfig
-********** MY-IMX6-EK200、MY-IMX6-EK314、MY-IMX6-EK336 **********
+********** MYZR-IMX6-EK200、MYZR-IMX6-EK314、MYZR-IMX6-EK336 **********
 myimx6a9_defconfig
-********** MY-IMX8M-EK314 **********
+********** MYZR-IMX8M-EK314 **********
 my_defconfig
 </pre>
@@ 第365行： / 第365行： @@
 【Note】：The **myimx 6ek140p-6y-256m-emmc. dtb** after **make** is changed to the configuration file corresponding to the development board model.
 <pre>
-********** MY-IMX6-EK140 **********
+********** MYZR-IMX6-EK140 **********
 myimx6ek140-6g-128m-emmc.dtb  myimx6ek140-6y-128m-emmc.dtb
 myimx6ek140-6g-128m-nand.dtb  myimx6ek140-6y-128m-nand.dtb
@@ 第373行： / 第373行： @@
 myimx6ek140-6g-512m-nand.dtb  myimx6ek140-6y-512m-nand.dtb
-********** MY-IMX6-EK140P **********
+********** MYZR-IMX6-EK140P **********
 myimx6ek140p-6g-128m-emmc.dtb  myimx6ek140p-6y-128m-emmc.dtb
 myimx6ek140p-6g-128m-nand.dtb  myimx6ek140p-6y-128m-nand.dtb
@@ 第381行： / 第381行： @@
 myimx6ek140p-6g-512m-nand.dtb  myimx6ek140p-6y-512m-nand.dtb
-********** MY-IMX6-EK200 **********
+********** MYZR-IMX6-EK200 **********
 myimx6ek200-6q-1g.dtb     myimx6ek200-6q-2g.dtb     myimx6ek200-6q-512m.dtb
 myimx6ek200-6u-1g.dtb     myimx6ek200-6u-2g.dtb     myimx6ek200-6u-512m.dtb
@@ 第387行： / 第387行： @@
 myimx6ek200-6qp-1g.dtb    myimx6ek200-6qp-2g.dtb    myimx6ek200-6qp-512m.dtb
-********** MY-IMX6-EK314 **********
+********** MYZR-IMX6-EK314 **********
 myimx6ek314-6q-1g.dtb     myimx6ek314-6q-2g.dtb     myimx6ek314-6q-512m.dtb
 myimx6ek314-6u-1g.dtb     myimx6ek314-6u-2g.dtb     myimx6ek314-6u-512m.dtb
@@ 第393行： / 第393行： @@
 myimx6ek314-6qp-1g.dtb    myimx6ek314-6qp-2g.dtb    myimx6ek314-6qp-512m.dtb
-********** MY-IMX6-EK336 **********
+********** MYZR-IMX6-EK336 **********
 myimx6ek336-6q-1g.dtb     myimx6ek336-6q-2g.dtb     myimx6ek336-6q-512m.dtb
 </pre>

MYZR-IMX Linux-4.9.88 Build Manual - 版本历史

Admin：Admin移动页面MY-IMX Linux-4.9.88 Build Manual至MYZR-IMX Linux-4.9.88 Build Manual，不留重定向

2020年10月22日 (四) 07:35 Admin

Admin：创建页面，内容为“ [^_^]: MY-IMX Linux-4.9.88 Build Reference Manual ## **Necessary explanation** **A7 series** includes MY-IMX6-EK140、MY-IMX6-EK140P. **A9 series**...”

Admin：创建页面，内容为“ [^_^]: MY-IMX Linux-4.9.88 Build Reference Manual ## Necessary explanation 　　A7 series includes MY-IMX6-EK140、MY-IMX6-EK140P. 　　A9 series...”