“MYZR-SSD20X-CB096 Hardware Introduction”的版本间的差异
来自明远智睿的wiki
(创建页面,内容为“<div> = '''MYZR-SSD20X-CB096 VIEW''' = ---- == '''Front view''' == 320px == '''Rear view''' == 文件:MYZR-SSD20X-CB096-...”) |
(没有差异)
|
2022年4月13日 (三) 11:24的最新版本
目录
MYZR-SSD20X-CB096 VIEW
Front view
Rear view
Size
MYZR-SSD20X-CB096 parameter
Hardware configuration
CPU | SigmaStar SSD202D | Consumer grade |
---|---|---|
Memory | 128MB | 128MB |
Storage | 128MB nandflash | Expandable 256MB |
Power supply
5V Input
CPU POWER CONSUMPTION
Rated power:5V==3A
Temperature range
Operating temperature
- Industrial grade:
- 0°C ~ 70°C
- 0°C ~ 70°C
Storage temperature
- -60°C ~ 125°C
- -60°C ~ 125°C
Operating system support
- Linux
Linux-4.9.84
- QT5.15
Detailed parameters of the master control platform
Interface specifications | The maximum number of configurable interfaces | Description | |
Communication Interface | Ethernet | 2 | 10/100Mbps half/full-duplex Supports two Ethernet ports,one built-in 10/100M Ethernet PHY,one RMII to connect external PHY |
USB | 2 | Two high-speed USB2.0 hosts | |
UART | 4 | Three generic UARTs and one fast UART with flow control | |
I2C | 2 | Two I2C masters | |
SPI | 1 | One SPI master | |
PWM | 4 | Four PWM outputs | |
SAR ADC | 3 | Built-in SAR ADC with 3-channel analog inputs for different kinds of applications | |
IR | 1 | One IR input | |
Timer | 4 | Three generic timers and one watchdog timer | |
External storage interface | SDIO 2.0 | 1 | Compatible with SDIO spec. 2.0,data bus 1/4 bit mode;Compatible with SD spec. 2.0,data bus 1/4 bit mode |
multimedia | TTL | 1 | TTL output up to HD 60fps with RGB565 or RGB666 or RGB888 format |
MIPI TX | 1 | DSI 4-lane with max.1.5Gbps and output up to FHD 60fps | |
Microphone | 1 | One mono ADC for microphone input | |
DMIC | 2 | Two stereo DMIC inputs | |
Lineout | 1 | One stereo DAC for lineout |
Pin definition & detailed function description
MYZR-SSD20X-CB096
Core plate pin No. | Core plate pin definition | Pin voltage |
---|---|---|
1 | GPIO8 | 3.3V |
UART2_RX | ||
SPI0_CZ | ||
2 | GPIO9 | 3.3V |
UART2_TX | ||
SPI0_CK | ||
3 | GPIO10 | 3.3V |
SPI0_DI | ||
4 | GPIO11 | 3.3V |
SPI0_DO | ||
5 | GPIO12 | 3.3V |
6 | GPIO13 | 3.3V |
7 | GPIO14 | 3.3V |
8 | DMIC_R | 3.3V |
9 | DMIC_L | 3.3V |
10 | DMIC_CLK | 3.3V |
11 | GPIO90 | 3.3V |
12 | GND | - |
13 | SE_XTAL_OUT | 3.3V |
14 | GND | - |
15 | SAR_GPIO2 | 3.3V |
16 | SAR_GPIO0 | 3.3V |
17 | PM_IRIN | 3.3V |
18 | PM_RESET | 3.3V |
19 | PM_UART_RX | 3.3V |
20 | PM_UART_TX | 3.3V |
21 | GPIO47 | 3.3V |
22 | GPIO48 | 3.3V |
23 | UART1_RX | 3.3V |
24 | UART1_TX | 3.3V |
25 | FUART_RX | 3.3V |
26 | FUART_TX | 3.3V |
27 | FUART_CTS | 3.3V |
28 | FUART_RTS | 3.3V |
29 | DP_P1 | 3.3V |
30 | DM_P1 | 3.3V |
31 | LCD_R0 | 3.3V |
TTL0 | ||
32 | LCD_R1 | 3.3V |
TTL1 | ||
33 | LCD_R2 | 3.3V |
TTL2 | ||
34 | LCD_R3 | 3.3V |
TTL3 | ||
35 | LCD_R4 | 3.3V |
TTL4 | ||
36 | LCD_R5 | 3.3V |
TTL5 | ||
37 | GND | - |
38 | MIPI_TX_D0P | 3.3V |
LCD_R6 | ||
TTL6 | ||
39 | MIPI_TX_D0N | 3.3V |
LCD_R7 | ||
TTL7 | ||
40 | MIPI_TX_D1P | 3.3V |
LCD_G0 | ||
TTL8 | ||
41 | MIPI_TX_D1N | 3.3V |
LCD_G1 | ||
TTL9 | ||
42 | MIPI_TX_CKP | 3.3V |
LCD_G2 | ||
TTL10 | ||
43 | MIPI_TX_CKN | 3.3V |
LCD_G3 | ||
TTL11 | ||
44 | MIPI_TX_D2P | 3.3V |
LCD_G4 | ||
TTL12 | ||
45 | MIPI_TX_D2N | 3.3V |
LCD_G5 | ||
TTL13 | ||
46 | MIPI_TX_D3P | 3.3V |
LCD_G6 | ||
TTL14 | ||
47 | MIPI_TX_D3N | 3.3V |
LCD_G7 | ||
TTL15 | ||
48 | GND | - |
49 | ETH1_MDIO | 3.3V |
LCD_B0 | ||
TTL16 | ||
50 | ETH1_MDC | 3.3V |
LCD_B1 | ||
TTL17 | ||
51 | ETH1_COL | 3.3V |
LCD_B2 | ||
TTL18 | ||
52 | ETH1_RXD0 | 3.3V |
LCD_B3 | ||
TTL19 | ||
53 | ETH1_RXD1 | 3.3V |
LCD_B4 | ||
TTL20 | ||
54 | ETH1_TX_CLK | 3.3V |
LCD_B5 | ||
TTL21 | ||
55 | ETH1_TXD0 | 3.3V |
LCD_B6 | ||
TTL22 | ||
56 | ETH1_TXD1 | 3.3V |
LCD_B7 | ||
TTL23 | ||
57 | ETH1_TX_EN | 3.3V |
LCD_PCLK | ||
TTL24 | ||
58 | LCD_HSYNC | 3.3V |
TTL25 | ||
59 | LCD_VSYNC | 3.3V |
TTL26 | ||
60 | LCD_DE | 3.3V |
TTL27 | ||
61 | GND | - |
62 | SD_CDZ | 3.3V |
63 | SD_D1 | 3.3V |
64 | SD_D0 | 3.3V |
65 | SD_CLK | 3.3V |
66 | SD_CMD | 3.3V |
67 | SD_D3 | 3.3V |
68 | SD_D2 | 3.3V |
69 | GPIO0 | 3.3V |
70 | GPIO1 | 3.3V |
71 | GPIO2 | 3.3V |
I2C1_SCL | ||
72 | GPIO3 | 3.3V |
I2C1_SDA | ||
73 | 5VIN_0 | 5V Input |
74 | 5VIN_1 | 5V Input |
75 | 5VIN_2 | 5V Input |
76 | GND | - |
77 | GND | - |
78 | PM_LED0 | 3.3V |
79 | PM_LED1 | 3.3V |
80 | ETH_RN | 3.3V |
81 | ETH_RP | 3.3V |
82 | ETH_TN | 3.3V |
83 | ETH_TP | 3.3V |
84 | DP_P2 | 3.3V |
85 | DM_P2 | 3.3V |
86 | GND | - |
87 | AUD_LINEOUT_R0 | 3.3V |
88 | AUD_LINEOUT_L0 | 3.3V |
89 | AUD_MICCM0 | 3.3V |
90 | AUD_MICIN0 | 3.3V |
91 | GPIO4 | 3.3V |
PWM0 | ||
92 | GPIO5 | 3.3V |
PWM1 | ||
93 | GPIO6 | 3.3V |
I2C0_SCL | ||
94 | GPIO7 | 3.3V |
I2C0_SDA | ||
95 | GPIO85 | 3.3V |
96 | GPIO86 | 3.3V |