MYZR-I.MX28-DEMO 底板介绍
来自明远智睿的wiki
底板图片(base board picture)
底板图示说明(instruction of base board icon)
图示 (icon) |
接口模块 (interface module) |
图示 (icon) |
接口模块 (interface module) |
---|
1 | 烧写按键 (programing key) |
12 | GPIO0 | |||
---|---|---|---|---|---|---|
2 | 复位按键 (reset key) |
13 | GPIO1 | |||
- | ||||||
3 | CAN1 | 14 | 以太网1 (ethernet1) |
|||
- | ||||||
4 | CAN0 | 15 | 以太网0 (ethernet0) |
|||
- | ||||||
5 | 拨码开关 (dial switch) |
16 | SD卡 (SD card) |
|||
- | ||||||
6 | 调试串口 (debug serial port) |
17 | CODEC接口 (CODEC interface) |
|||
- | ||||||
7 | ADC | 18 | 触摸屏接口 (touch screen interface) |
|||
- | ||||||
8 | TTL_COM2 | 19 | 双路USB HOST (two way USB HOST) |
|||
- | ||||||
9 | TTL_COM3 | 20 | MINIUSB烧写接口 (MINIUSB programing interface) |
|||
- | ||||||
10 | TTL_COM0 | 21 | 5V电源接口 (5V power source interface) |
|||
- | ||||||
11 | SPI | 22 | WIFI | |||
} |