MYZR-IMX6-A9 Linux-3.0.35 v3.0

来自明远智睿的wiki
Admin讨论 | 贡献2019年1月3日 (四) 14:25的版本 (创建页面,内容为“ [^_^]: MY-IMX6-A9 Linux-3.0.35 Build Reference Manual v3.0 ## **Download relevant documents** #### Cross-compile tool chain   **A9 series**:Open the network...”)

(差异) ←上一版本 | 最后版本 (差异) | 下一版本→ (差异)
跳转至: 导航搜索

Download relevant documents

Cross-compile tool chain

  A9 series:Open the network disk to 2.1_OS_Linux-3.0.35 -> 03_toolchain,Download MY-IMX-A9 Directory.

Source code

  u-boot:Open the network disk to 2.1_OS_Linux-3.0.35 -> 02_source,Download u-boot-2016.03-*.tar.bz2 (Source package version number svn315 and above).   Kernel:Open the network disk to 2.1_OS_Linux-3.0.35 -> 02_source,Download linux-3.0.35-*.tar.bz2 (Source package version number svn31 and above).


Install cross compilation tool chain

  • Unload cross compilation tool chain
=====> Input:
tar xf gcc-4.6.2-glibc-2.13-linaro-multilib-2011.12.tar.bz2 -C /home/myzr/my-work/03_toolchain
  • Copy the tool chain configuration file
=====> Input:
cp environment-setup-gcc-4.6-arm.sh /home/myzr/my-work/03_toolchaingcc-4.6.2-glibc-2.13-linaro-multilib-2011.12/
  • Source Toolchain Profile
=====> Input:
source /home/myzr/my-work/03_toolchain/gcc-4.6.2-glibc-2.13-linaro-multilib-2011.12/environment-setup-gcc-4.6-arm.sh
  • Verify cross compilation tool installation
=====> Input:
${CROSS_COMPILE}gcc -v

=====> Output: 
Using built-in specs.
COLLECT_GCC=arm-fsl-linux-gnueabi-gcc
COLLECT_LTO_WRAPPER=/home/myzr/my-work/03_toolchain/gcc-4.6.2-glibc-2.13-linaro-multilib-2011.12/fsl-linaro-toolchain/bin/../libexec/gcc/arm-fsl-linux-gnueabi/4.6.2/lto-wrapper
Target: arm-fsl-linux-gnueabi
Configured with: /work/build/.build/src/gcc-linaro-4.6-2011.06-0/configure --build=i686-build_pc-linux-gnu --host=i686-build_pc-linux-gnu --target=arm-fsl-linux-gnueabi --prefix=/work/fsl-linaro-toolchain-2.13 --with-sysroot=/work/fsl-linaro-toolchain-2.13/arm-fsl-linux-gnueabi/multi-libs --enable-languages=c,c++ --with-pkgversion='Freescale MAD -- Linaro 2011.07 -- Built at 2011/08/10 09:20' --enable-__cxa_atexit --disable-libmudflap --disable-libgomp --disable-libssp --with-gmp=/work/build/.build/arm-fsl-linux-gnueabi/build/static --with-mpfr=/work/build/.build/arm-fsl-linux-gnueabi/build/static --with-mpc=/work/build/.build/arm-fsl-linux-gnueabi/build/static --with-ppl=/work/build/.build/arm-fsl-linux-gnueabi/build/static --with-cloog=/work/build/.build/arm-fsl-linux-gnueabi/build/static --with-libelf=/work/build/.build/arm-fsl-linux-gnueabi/build/static --with-host-libstdcxx='-static-libgcc -Wl,-Bstatic,-lstdc++,-Bdynamic -lm -L/work/build/.build/arm-fsl-linux-gnueabi/build/static/lib -lpwl' --enable-threads=posix --enable-target-optspace --enable-plugin --enable-multilib --with-local-prefix=/work/fsl-linaro-toolchain-2.13/arm-fsl-linux-gnueabi/multi-libs --disable-nls --enable-c99 --enable-long-long --with-system-zlib
Thread model: posix
gcc version 4.6.2 20110630 (prerelease) (Freescale MAD -- Linaro 2011.07 -- Built at 2011/08/10 09:20) 


u-boot compilation

Preparation before compilation

  • Create a compile working directory
=====> Input:
mkdir ~/my-work/02_source/ -p
  • Unpack source code to working directory
=====> Input:
tar xf u-boot-2016.03-svn*.tar.bz2 -C ~/my-work/02_source/

Compile the u-boot target file

  • Enter source directory
=====> Input:
cd ~/my-work/02_source/u-boot-2016.03
  • Generate the target development board. config file
=====> Input:
make myimx6ek200-6q-1g_defconfig

=====> Output: 
  HOSTCC  scripts/basic/fixdep
  HOSTCC  scripts/kconfig/conf.o
  SHIPPED scripts/kconfig/zconf.tab.c
  SHIPPED scripts/kconfig/zconf.lex.c
  SHIPPED scripts/kconfig/zconf.hash.c
  HOSTCC  scripts/kconfig/zconf.tab.o
  HOSTLD  scripts/kconfig/conf
#
# configuration written to .config
#

【Note】:myimx6ek200-6q-1g_defconfig above make after change to the configuration file corresponding to the development board model.

********** MY-IMX6-EK200 **********
myimx6ek200-6q-1g_defconfig     myimx6ek200-6q-2g_defconfig     myimx6ek200-6q-512m_defconfig  
myimx6ek200-6u-1g_defconfig     myimx6ek200-6u-2g_defconfig     myimx6ek200-6u-512m_defconfig  
myimx6ek200-6s-512m_defconfig   myimx6ek200-6s-1g_defconfig     myimx6ek200-6s-128m_defconfig  
myimx6ek200-6qp-1g_defconfig    myimx6ek200-6qp-2g_defconfig    myimx6ek200-6qp-512m_defconfig  

********** MY-IMX6-EK314 **********
myimx6ek314-6q-1g_defconfig     myimx6ek314-6q-2g_defconfig     myimx6ek314-6q-512m_defconfig  
myimx6ek314-6u-1g_defconfig     myimx6ek314-6u-2g_defconfig     myimx6ek314-6u-512m_defconfig  
myimx6ek314-6s-512m_defconfig   myimx6ek314-6s-1g_defconfig     myimx6ek314-6s-128m_defconfig  
myimx6ek314-6qp-1g_defconfig    myimx6ek314-6qp-2g_defconfig    myimx6ek314-6qp-512m_defconfig  
  • compiling
=====> Input:
make 

=====> Output: 
scripts/kconfig/conf  --silentoldconfig Kconfig
  CHK     include/config.h
  UPD     include/config.h
  GEN     include/autoconf.mk
  GEN     include/autoconf.mk.dep
  CHK     include/config/uboot.release
  CHK     include/generated/timestamp_autogenerated.h
  CFG     u-boot.cfg
  ......
  LD      u-boot
  OBJCOPY u-boot-nodtb.bin
  OBJCOPY u-boot.srec
  SYM     u-boot.sym
  COPY    u-boot.bin
  CFGS    board/myzr/myimx6/myimx6a9-6q-ddr3.cfg.cfgtmp
  MKIMAGE u-boot.imx

Note: If there is a prompt “cc1: error”,usually the configuration of the cross-compilation tool does not work, you can perform this step after pressing the "source tool chain profile” operation in the previous "cross compile tool chain installation".

  • u-boot Target File u-boot.imx is the target file.

Compile U-boot environment variable scripts

=====> Input:
mkimage -A arm -O linux -T script -C none -a 0 -e 0 -n "myzr bootscripts" -d board/myzr/bootscripts/myimx6a9_l3035_script.cmd my_environment.scr

=====> Output: 
Image Name:   myzr bootscripts
Created:      Wed Jan  2 09:39:38 2019
Image Type:   ARM Linux Script (uncompressed)
Data Size:    2090 Bytes = 2.04 kB = 0.00 MB
Load Address: 00000000
Entry Point:  00000000
Contents:
   Image 0: 2082 Bytes = 2.03 kB = 0.00 MB

Target File

"u-boot.imx " and " my_environment.scr" That is, the compiled target file, saving the two files


Kernel compilation

Preparation before compilation

  • Create a compile working directory
=====> Input:
mkdir ~/my-work/02_source/ -p
  • Unzip the source package to the working directory
=====> Input:
tar xf linux-3.0.35-svn*.tar.bz2 -C ~/my-work/02_source/

Compile the kernel target file

  • Enter source directory
=====> Input:
cd ~/my-work/02_source/linux-3.0.35
  • To generate the target platform". config "file
=====> Input:
make myimx6a9_defconfig

=====> Output: 
  HOSTCC  scripts/basic/fixdep
  HOSTCC  scripts/kconfig/conf.o
  SHIPPED scripts/kconfig/zconf.tab.c
  SHIPPED scripts/kconfig/lex.zconf.c
  SHIPPED scripts/kconfig/zconf.hash.c
  HOSTCC  scripts/kconfig/zconf.tab.o
  HOSTLD  scripts/kconfig/conf
#
# configuration written to .config
#

Note: If there is an error“Can't find default configuration "arch/x86/configs” ,because the configuration of the cross compilation tool chain did not work,You can do this step again after you have done it once in the "source toolchain configuration file" in "cross-compile toolchain installation earlier"

  • Compiles kernel target files
=====> Input:
make zImage

=====> Output: 
scripts/kconfig/conf --silentoldconfig Kconfig
  CHK     include/linux/version.h
  UPD     include/linux/version.h
  CHK     include/generated/utsrelease.h
  UPD     include/generated/utsrelease.h
  Generating include/generated/mach-types.h
  CC      kernel/bounds.s
  ......
  AS      arch/arm/boot/compressed/piggy.gzip.o
  LD      arch/arm/boot/compressed/vmlinux
  OBJCOPY arch/arm/boot/zImage
  Kernel: arch/arm/boot/zImage is ready
  • Kernel target file
    arch/arm/boot/zImage is the kernel target file

Compile the kernel module package

  • Compiling
=====> Input:
make modules

=====> Output: 
  CHK     include/linux/version.h
  CHK     include/generated/utsrelease.h
make[1]: “include/generated/mach-types.h” It's the latest.
  CALL    scripts/checksyscalls.sh
  CC [M]  fs/autofs4/init.o
  ......
  LD [M]  drivers/usb/gadget/g_serial.ko
  LD [M]  fs/nls/nls_ascii.ko
  LD [M]  fs/autofs4/autofs4.ko
  LD [M]  fs/nls/nls_utf8.ko
  • Create a save directory for the kernel module
=====> Input:
mkdir modules
  • Install kernel module to specified directory
=====> Input:
make modules_install INSTALL_MOD_PATH=./modules

=====> Output: 
  INSTALL crypto/tcrypt.ko
  INSTALL drivers/gpu/drm/drm.ko
  INSTALL drivers/gpu/drm/vivante/vivante.ko
  ......
  INSTALL fs/autofs4/autofs4.ko
  INSTALL fs/nls/nls_ascii.ko
  INSTALL fs/nls/nls_utf8.ko
  DEPMOD  3.0.35-myimx6a9-svn42
  • Package the kernel module files
=====> Input:
tar cjf kernel-modules.tar.bz2 -C modules lib

Target File

"zImage" and "kernel-modules.tar.bz2" are the target files compiled and the two files are saved


Linux C program compilation

Prepare source code

  Open the disk to 5_MY-Demo -> MY-Linux-C-Demo,Download hello.c file and copy to virtual machine.

Compile target file

=====> Input:
${CROSS_COMPILE}gcc hello.c -o hello.out

Note: If you have "no command found" information because the configuration of the cross-compilation tool chain is not effective, you can perform this step after pressing the "source tool chain profile" operation in the previous "cross compilation tool chain installation"

Run Linux C Target Program

  • Copy the compiled" hello.out" to the development board
  • Run the Linux C target program on the development board
=====> Input:
chmod +x ./hello.out
./hello.out

=====> Output:
MYZR Technology Co.,Ltd.

Web:  http://www.myzr.com.cn/
Wiki: http://wiki.myzr.com.cn/
BBS:  http://bbs.myzr.com.cn/

Tel: 0756-3628023/3628021
E-mail: service@myzr.com.cn


--------------------------------------------------------------------------------
* ZhuHai MYZR Technology CO.,LTD.
* Latest Update: 2019/01/02  
* Supporter: Tang Bin
--------------------------------------------------------------------------------