MYZR-IMX6-MB314 Hardware Introduction

来自明远智睿的wiki
Admin讨论 | 贡献2020年4月16日 (四) 09:19的版本 Overview of interfaces

跳转至: 导航搜索

Overview of interfaces


Front view (MB314+CB314)

My-imx6ek314 front.jpg

Front view (MB314+CB336)

MY-IMX6-EK336-front.jpg

Rear view (MB314)

              My-imx6ek314 back.jpg

Interface function


2 bit dial switch

Silk screen:SW1
Definition of pin & signal as below:
My-imx6-mb314-2.1.0.1.png

Mode control 1 bit 2 bit
Burning mode 1 0
Booting mode 0 1

Volume down

Silk screen:SW2
Interface property: volume control(volume down)
Definition of pin & signal as below:
My-imx6-mb314-2.2.0.1.png

Volume up

Silk screen:SW3
Interface property: volume control(volume up)
Definition of pin & signal as below:
My-imx6-mb314-2.3.0.1.png

Wake up

Silk screen:SW4
Interface property:sleeping wake up
Definition of pin & signal as below:
My-imx6-mb314-2.4.0.1.png

Reset

Silk screen:SW5
Interface property: system reset
Definition of pin & signal as below:
My-imx6-mb314-2.5.0.1.png

18/24bit RGB

  Silk screen:J21
RGB crystal liquid is 24bit mode,compatible to 18bit/16bit mode,through which RGB resistance screen panel and RGB capacitor screen panel in different sizes and specifications produced by MYZR can be connected,RGB interface block is build with connector imported,abandon the cheap drawer type produced domestically,which is opposite press type to ensure easier installation,better performance and connectivity.

Sefinition of pin & signal as below:
My-imx6-mb314-2.6.0.1.png

Pin Signal Description Pin Signal Description
J21-1 DISP0_DAT4 LCD data 4 J21-21 DISP0_DRDY LCD_DataEn
J21-2 DISP0_DAT10 LCD data 10 J21-22 DISP0_DAT1 LCD data 1
J21-3 DISP0_DAT2 LCD data 2 J21-23 DISP0_DAT3 LCD data 3
J21-4 DISP0_DAT21 LCD data 21 J21-24 DISP0_DAT8 LCD data 8
J21-5 DISP0_DAT6 LCD data 6 J21-25 DISP0_DAT13 LCD data 13
J21-6 DISP0_DAT20 LCD data 20 J21-26 DISP0_DAT15 LCD data 15
J21-7 DISP0_DAT19 LCD data 19 J21-27 DISP0_DAT11 LCD data 11
J21-8 DISP0_HSYNCH LCD row clock J21-28 DISP0_DAT23 LCD data 23
J21-9 DISP0_DAT0 LCD data 0 J21-29 DISP0_DAT16 LCD data 16
J21-10 DISP0_DAT7 LCD data 7 J21-30 NANDF_CS3 GPIO control
J21-11 DISP0_DAT5 LCD data 5 J21-31 SD1_DAT1/TOUCH_nEINT1
J21-12 DISP0_DAT12 LCD data 12 J21-32 TOUCH_SCL I2C clock
J21-13 DISP0_DAT9 LCD data 9 J21-33 TOUCH_SDA I2C data
J21-14 DISP0_DAT17 LCD data 17 J21-34 5VIN 5V input
J21-15 DISP0_DAT14 LCD data 14 J21-35
J21-16 DISP0_DAT22 LCD data 22 J21-36
J21-17 DISP0_DAT18 LCD data 18 J21-37 GND digital ground
J21-18 DISP0_CLK LCD dot clock J21-38
J21-19 DISP0_CONTRAST LCD backlight adjustment J21-39
J21-20 DISP0_VSYNCH LCD frame clock J21-40

18/24bit LVDS0

Silk screen:J20
LVDS0 crystal liquid is 24bit mode,compatible to 18bit mode,through which LVDS resistance screen panel and LVDS capacitor screen panel in different sizes and specifications produced by MYZR can be connected, LVDS0 interface block is build with connector imported,abandon the cheap drawer type produced domestically,which is opposite press type to ensure easier installation, better performance and connectivity.

Definition of pin & signal as below:
My-imx6-mb314-2.7.0.1.png

Pin Signal Description Pin Signal Description
J20-1 LVDS0_TX1_N LVDS0 differential data 1 J20-21 TOUCH_SCL I2C clock
J20-2 LVDS0_TX1_P J20-22 TOUCH_SDA I2C data
J20-3 GND digital ground J20-23 GND digital ground
J20-4 LVDS0_TX0_P LVDS0 differential data 0 J20-24
J20-5 LVDS0_TX0_N J20-25
J20-6 GND digital ground J20-26 5VIN 5V input
J20-7 LVDS0_TX3_N LVDS0 differential data 3 J20-27
J20-8 LVDS0_TX3_P J20-28
J20-9 GND digital ground J20-29
J20-10 LVDS0_TX2_P LVDS0 differential data 2 J20-30
J20-11 LVDS0_TX2_N J20-31 NC dangling
J20-12 GND digital ground J20-32
J20-13 LVDS0_CLK_N LVDS0 differential clock J20-33
J20-14 LVDS0_CLK_P J20-34
J20-15 GND digital ground J20-35
J20-16 SD1_DAT1/TOUCH_nEINT1 GPIO control J20-36
J20-17 NANDF_CS3 J20-37
J20-18 GND digital ground J20-38
J20-19 DISP0_CONTRAST LVDS0 backlight adjustment J20-39
J20-20 GND digital ground J20-40

18/24bit LVDS1

  Silk screen:J22
LVDS1 crystal liquid interface is the same as LVDS0 in terms of definition and connector model,users can connect crytal liquid in LVDS0 directly to LVDS1.

Definition of pin & signal as below:
My-imx6-mb314-2.8.0.1.png

Pin Signal Description Pin Signal Description
J22-1 LVDS1_TX1_N LVDS1 differential data 1 J22-21 TOUCH_SCL I2C clock
J22-2 LVDS1_TX1_P J22-22 TOUCH_SDA I2C clock
J22-3 GND digital ground J22-23 GND digital ground
J22-4 LVDS1_TX1_P LVDS1 differential data 1 J22-24
J22-5 LVDS1_TX1_N J22-25
J22-6 GND digital ground J22-26 5VIN 5V input
J22-7 LVDS1_TX3_N LVDS1 differential data 3 J22-27
J22-8 LVDS1_TX3_P J22-28
J22-9 GND digital ground J22-29
J22-10 LVDS1_TX2_P LVDS1 differential data 2 J22-30
J22-11 LVDS1_TX2_N J22-31 NC dangling
J22-12 GND digital ground J22-32
J22-13 LVDS1_CLK_N LVDS1 difference clock J22-33
J22-14 LVDS1_CLK_P J22-34
J22-15 GND digital ground J22-35
J22-16 SD1_DAT1/TOUCH_nEINT1 GPIO control J22-36
J22-17 NANDF_CS3 J22-37
J22-18 GND digital ground J22-38
J22-19 DISP1_CONTRAST LVDS1 backlight adjustment J22-39
J22-20 GND digital ground J22-40


18/24bit LVDS1 expansion

slik screen :J24
Definition of pin & signal as below:
My-imx6-mb314-2.9.0.1.png

Pin Signal Description Pin Signal Description
J24-1 5VIN 5V input J24-2 5VIN 5V input
J24-3 GND digital ground J24-4 TOUCH_SDA I2C3 data
J24-5 TOUCH_SCL I2C3 clock J24-6 DISP0_CNTRST backlight enabling
J24-7 GPIO6_7 GPIO J24-8 GPIO2_1 GPIO
J24-9 LVDS1_TX1_N LVDS1 differential data1 J24-10 LVDS1_TX1_P LVDS1 differential data1
J24-11 LVDS1_TX0_P LVDS1 differential data 0 J24-12 LVDS1_TX0_N LVDS1 differential data 0
J24-13 LVDS1_TX3_N LVDS1 differential data 3 J24-14 LVDS1_TX3_P LVDS1 differential data 3
J24-15 LVDS1_TX2_P LVDS1 differential data 2 J24-16 LVDS1_TX2_N LVDS1 differential data 2
J24-17 LVDS1_CLK_N LVDS1 differential clock J24-18 LVDS1_CLK_P LVDS1 differential clock
J24-19 GND digital ground J24-20 GND digital ground

I2C expansion

Silk screen:J23
Definition of pin & signal as below:
My-imx6-mb314-2.10.0.1.png

Pin Signal Description Pin Signal Description
J23-1 GND digital ground J23-2 5VIN 5V input
J23-3 GND digital ground J23-4 GEN_3V3 3.3V input
J23-5 I2C1_SCL I2C1 clock J23-6 I2C1_SDA I2C1 data
J23-7 I2C2_SCL I2C2 clock J23-8 I2C2_SDA I2C2 data
J23-9 I2C3_SCL I2C3 clock J23-10 I2C3_SDA I2C3 data
J23-11 USB_H1_PWR_EN GPIO J23-12 USB_H1_OC GPIO


Debug serial port

Silk screen:P3
Interface property:UART0,232 electrical Level, debug serial port
Definition of pin & signal as below:
  My-imx6-mb314-2.11.0.1.png

Headphone output

Silk screen:J16
Interface property:audio signal output, 3.5mm interface
Definition of pin & signal as below:
  My-imx6-mb314-2.12.0.1.png

MIC input

Silk screen:J14
Interface property:audio signal input, 3.5mm interface
Definition of pin & signal as below:
My-imx6-mb314-2.13.0.1.png

Serial port extension/TTL electrical level

Silk screen:J12
Definition of pin & signal as below:
My-imx6-mb314-2.14.0.1.png

Pin Signal Description Pin Signal Description
J12-1 5VIN 5V input J12-2 5VIN 5V input
J12-3 GND digital ground J12-4 GND digital ground
J12-5 GEN_3V3 3.3v input J12-6 GEN_3V3 3.3v input
J12-7 UART2_CTS serial port 2 CTS J12-8 UART2_RTS serial port 2 RTS
J12-9 UART2_RXD serial port 2 receiving J12-10 UART2_TXD serial port 2 sending
J12-11 UART3_RTS serial port 3 RTS J12-12 UART3_RXD serial port 3 receiving
J12-13 UART3_TXD serial port 3 sending J12-14 UART3_CTS serial port 3 sending
J12-15 UART4_TXD serial port 4 sending J12-16 UART5_RXD serial port 5 receiving
J12-17 UART4_RXD serial port 4 receiving J12-18 UART5_TXD serial port 5 sending
J12-19 GND digital ground J12-20 GND digital ground

232 serial port

Silk screen:P2
Interface property:UART4, RS-232, application serial port
Definition of pin & signal as below:
My-imx6-mb314-2.15.0.1.png

485 serial port

Silk screen:J11
Interface property:UART3, RS-485, application serial port
Definition of pin & signal as below:
My-imx6-mb314-2.16.0.1.png

RGMII

Silk screen:U12
Interface property:GigE Vision
Definition of pin & signal as below:
My-imx6-mb314-2.17.0.1.png

SATA II

Silk screen:J9
interface property: 3Gbps SATA I interface
Definition of pin & signal as below:
My-imx6-mb314-2.18.0.1.png

SATA power supply

Silk screen:J10
Definition of pin & signal as below:
My-imx6-mb314-2.19.0.1.png

pin signal description
J10-1 5VIN 5V power input
J10-2 GND digital ground
J10-3 GND digital ground
J10-4 NC 未连接(unconnected)

MIPI-CSI

Silk screen:J7
Definition of pin & signal as below:
My-imx6-mb314-2.20.0.1.png

pin signal description pin signal description
J7-1 5VIN 5V input J7-2 5VIN 5V input
J7-3 5VIN 5V input J7-4 GND digital ground
J7-5 CSI_CLK0P CSI differential clock J7-6 CSI_CLK0M CSI differential clock
J7-7 GND digital ground J7-8 CSI_D0P CSI differential data 0
J7-9 CSI_D0M CSI differential data 0 J7-10 GND digital ground
J7-11 CSI_D1P CSI differential data 1 J7-12 CSI_D1M CSI differential data 1
J7-13 GND digital ground J7-14 CSI_MCLK CSI master clock
J7-15 GND digital ground J7-16 GND digital ground
J7-17 CSI2-SDA I2C2 data J7-18 CSI2_SCL I2C2 clock
J7-19 GPIO7_12 GPIO J7-20 GPIO7_13 GPIO

OTG

Silk screen:J5
Interface property:USB ON-The-Go, use for burning
Definition of pin & signal as below:
My-imx6-mb314-2.21.0.1.png

RMII

Silk screen:P1
Interface property:USB1 extended gigabit Ethernet
Definition of pin & signal as below:
My-imx6-mb314-2.22.0.1.png

USB expansion

Silk screen:J2
Interface property:USB1 expansion, double USB
Definition of pin & signal as below:
My-imx6-mb314-2.23.0.1.png

RTC

Silk screen:U8
Interface property:I2C communication RTC
Definition of pin & signal as below:
My-imx6-mb314-2.24.0.1.png

MIPI-DSI

Silk screen:U1
Preselection screen type:N070ICN-GB1
Definition of pin & signal as below:
My-imx6-mb314-2.25.0.1.png

pin signal description pin signal description
U1-1 GND1 digital ground U1-17 LEDPWM unconnected
U1-2 GND2 digital ground U1-18 CLK_P DSI differential clock
U1-3 GND3 digital ground U1-19 VLED1 9V backlight power supply input
U1-4 D0_N DSI differential data 0 U1-20 GND6 digital ground
U1-5 RST reset U1-21 VLED2 9V backlight power supply input
U1-6 D0_P DSI differential data 0 U1-22 D2_N unconnected
U1-7 VCI1_3V3 3.3V input U1-23 ID earthing
U1-8 GND4 digital ground U1-24 D2_P unconnected
U1-9 VCI2_3V3 3.3V input U1-25 LED1 earthing
U1-10 D1_N DSI differential data 1 U1-26 GND7 digital ground
U1-11 MTP unconnected U1-27 LED2 unconnected
U1-12 D1_P DSI differential data 1 U1-28 D3_N unconnected
U1-13 VDDI2_1V8 1.8V input U1-29 GND8 digital ground
U1-14 GND5 digital ground U1-30 D3_P unconnected
U1-15 VDDI2_1V8 1.8V input U1-31 GND9 digital ground
U1-16 CLK_N DSI differential clock

DSI backlight power supply

Silk screen:J1
Interface property:9V power supply input
Definition of pin & signal as below:
My-imx6-mb314-2.26.0.1.png

MPS main power switch

Silk screen:J3
Interface property:power switch

main power input

Silk screen:J4
Interface property:

jack with inside positive and outside negative
power supply:5V
current:2.5A or above

Definition of pin & signal as below:
My-imx6-mb314-2.28.0.1.png

HDMI

Silk screen:J6
Interface property:HDMI-1.4
Definition of pin & signal as below:
My-imx6-mb314-2.29.0.1.png

3G mini-PCIE & SIM cassette

Name Silk screen Interface property
3G mini-PCIE J8 miniPCIE standard interface
SIM cassette CON1 Interface property: 3G SIM card

Definition of pin & signal as below:
My-imx6-mb314-2.30.0.1.png
My-imx6-mb314-2.30.0.2.png

JTAG

Silk screen:U11
Definition of pin & signal as below:
My-imx6-mb314-2.31.0.1.png

pin signal description pin signal description
U11-1 JTAG_TCK TCK input U11-2 GND digital ground
U11-3 JTAG_TDO test data output U11-4 VCC 3.3V input
U11-5 JTAG_TMS test mode selection U11-6 nRST reset
U11-7 NC unconnected U11-8 NC unconnected
U11-9 JTAG_TDI test mode selection U11-10 GND digital ground

GPIO expansion

Silk screen:U14
Definition of pin & signal as below:
My-imx6-mb314-2.32.0.1.png

pin signal description pin signal description
U14-1 5VIN 5V input U14-2 GEN_3V3 3.3V input
U14-3 SD3_DATA4 configurable as GPIO U14-4 SD3_DATA5 configurable as GPIO
U14-5 SD3_DATA7 configurable as GPIO U14-6 SD3_DATA6 configurable as GPIO
U14-7 GPIO6_16 GPIO U14-8 GPIO2_7 GPIO
U14-9 GPIO2_3 GPIO U14-10 GPIO2_6 GPIO
U14-11 GPIO6_9 GPIO U14-12 GPIO6_11 GPIO
U14-13 GPIO2_2 GPIO U14-14 GPIO2_0 GPIO
U14-15 GPIO2_4 GPIO U14-16 GPIO2_5 GPIO
U14-17 GPIO1_29 GPIO U14-18 GPIO1_27 GPIO
U14-19 GPIO1_30 GPIO U14-20 GPIO1_26 GPIO
U14-21 GPIO1_24 GPIO U14-22 GND digital ground
U14-23 SD2_CLK SD2 clock U14-24 SD2_DATA0 SD2 data wire
U14-25 SD2_DATA3 SD2 data wire U14-26 SD2_DATA2 SD2 data wire
U14-27 SD2_CMD SD2 command pin U14-28 SD2_DATA1 SD2 data wire
U14-29 USB_OTG_OC configurable as GPIO U14-30 USB_OTG_PWR_EN configurable as GPIO
U14-31 GND digital ground U14-32 GND digital ground
U14-33 SD1_CMD SD1 command pin U14-34 SD1_DAT0 SD1 data wire
U14-35 SD1_CLK SD1 clock U14-36 SD1_DAT1 SD1 data wire
U14-37 SD1_DAT3 SD1 data wire U14-38 SD1_DAT2 SD1 data wire
U14-39 GND digital ground U14-40 GND digital ground

SPI expansion

Silk screen:J13
Definition of pin & signal as below:
My-imx6-mb314-2.33.0.1.png

pin signal description pin signal description
J13-1 5VIN 5V input J13-2 5VIN 5V input
J13-3 5VIN 5V input J13-4 GEN_3V3 3.3V input
J13-5 CSPI2_RDY SPI2 data-ready signal J13-6 CSPI1_MISO SPI1 Master data input
J13-7 CSPI2_MISO Reuse the EIM OE J13-8 CSPI1_RDY SPI1 data-ready signal
J13-9 CSPI2_CLK Reuse the EIM_CS0 J13-10 CSPI1_CLK SPI1 clock
J13-11 CSPI2_MOSI Reuse the EIM_CS1 J13-12 CSPI1_MOSI SPI1 Master data output
J13-13 CSPI2_CSI Reuse the EIM_LBA J13-14 CSPI1_CS1 selective signal
J13-15 CSPI2_CS0 Reuse the EIM_RW J13-16 GND digital ground
J13-17 GND digital ground J13-18 GND digital ground
J13-19 GND digital ground J13-20 GND digital ground

CAN1

Silk screen:J17
Interface property:CAN1
Definition of pin & signal as below:
My-imx6-mb314-2.34.0.1.png

CAN2

Silk screen:J15
Interface property:CAN2
Definition of pin & signal as below:
My-imx6-mb314-2.35.0.1.png

CSI(CMOS Sensor Interface)

silk screen:J19
Definition of pin & signal as below:
My-imx6-mb314-2.36.0.1.png

pin signal description pin signal description
J19-1 5VIN 5V input J19-2 GND digital ground
J19-3 CSI0_SCL I2C1 clock J19-4 CSI0_SDA I2C1 data
J19-5 CSI0_VSYNCH field synchronization interface J19-6 CSI0_HSYNCH Line synchronization interface
J19-7 CDI0_PIXCLK camera output master clock J19-8 CSI0_MCLK CSI output master clock
J19-9 CSI0_DAT19 CSI data bus J19-10 CSI0_DAT18 CSI data bus
J19-11 CSI0_DAT17 CSI data bus J19-12 CSI0_DAT16 CSI data bus
J19-13 CSI0_DAT15 CSI data bus J19-14 CSI0_DAT14 CSI data bus
J19-15 CSI0_DAT13 CSI data bus J19-16 CSI0_DAT12 CSI data bus
J19-17 GND digital ground J19-18 CSI0_DATA_EN bus enable
J19-19 NC unconnected J19-20 NC unconnected

SD cassette

Silk screen:J25
Interface property: standard SD cassette
Definition of pin & signal as below:
My-imx6-mb314-2.37.0.1.png

PCIT expansion

Silk screen:J26
Definition of pin & signal as below:
My-imx6-mb314-2.38.0.1.png

pin signal description pin signal description
J26-1 PCIE_RXP receiving differential signal J26-13 GPIO6_8 GPIO
J26-2 PCIE_RXM receiving differential signal J26-14 GPIO6_14 GPIO
J26-3 GND digital ground J26-15 PCIE_SMD_CLK I2C3 clock
J26-4 PCIE_TXP sending differential signal J26-16 PCIE_SMB_DATA I2C3 data
J26-5 PCIE_TXM sending differential signal J26-17 GPIO7_11 GPIO
J26-6 GND digital ground J26-18 GND digital ground
J26-7 CLK1_P differential clock J26-19 GND digital ground
J26-8 CLK1_N differential clock J26-20 GND digital ground
J26-9 GND digital ground J26-21 5VIN 5V input
J26-10 3G_USBDM USB differential signal J26-22 5VIN 5V input
J26-11 3G_USBDP USB differential signal J26-23 5VIN 5V input
J26-12 GND digital ground J26-24 5VIN 5V input

WIFI module

Silk screen:U24
Module model:UM12BS
Definition of pin & signal as below:
My-imx6-mb314-2.39.0.1.png

GPS module

Silk screen:U27
Interface property: standard IPX interface
Module model:NEO-6M
Definition of pin & signal as below:
My-imx6-mb314-2.40.0.1.png

EIM expansion

Silk screen:J27
Definition of pin & signal as below:
My-imx6-mb314-2.41.0.1.png

pin signal description pin signal description
J27-1 GND digital ground J27-17 EIM_DA7 address & data
J27-2 GND digital ground J27-18 EIM_DA8 address & data
J27-3 GND digital ground J27-19 EIM_DA3 address & data
J27-4 GND digital ground J27-20 EIM_DA6 address & data
J27-5 EIM_DA15 address & data J27-21 EIM_DA1 address & data
J27-6 EIM_WAIT J27-22 EIM_DA11 address & data
J27-7 EIM_RW J27-23 EIM_OE
J27-8 EIM_DA2 address & data J27-24 EIM_DA14 address & data
J27-9 EIM_DA10 address & data J27-25 EIM_DA13 address & data
J27-10 EIM_EB0 J27-26 EIM_BCLK output clock
J27-11 EIM_DA4 address & data J27-27 EIM_DA5 address & data
J27-12 EIM_EB1 J27-28 EIM_DA9 address & data
J27-13 EIM_LBA J27-29 EIM_DA0 address & data
J27-14 EIM_CS1 chip select 1 J27-30 5VIN 5V input
J27-15 EIM_CS0 chip select 1 J27-31 5VIN 5V input
J27-16 EIM_DA12 address & data J27-32 5VIN 5V input