“MYZR-IMX6 Linux-4.1.15 编译参考手册”的版本间的差异
第24行: | 第24行: | ||
<pre> | <pre> | ||
=====> Input: | =====> Input: | ||
− | ./fsl-imx- | + | ./fsl-imx-x11-glibc-x86_64-meta-toolchain-qt5-cortexa7hf-neon-toolchain-4.1.15-2.1.0.sh |
=====> Output: | =====> Output: | ||
Freescale i.MX Release Distro SDK installer version 4.1.15-2.1.0 | Freescale i.MX Release Distro SDK installer version 4.1.15-2.1.0 | ||
================================================================ | ================================================================ | ||
− | Enter target directory for SDK (default: /opt/fsl-imx- | + | Enter target directory for SDK (default: /opt/fsl-imx-x11/4.1.15-2.1.0): |
=====> Input: | =====> Input: | ||
− | /home/myzr/my-work/03_toolchain/fsl-imx- | + | /home/myzr/my-work/03_toolchain/fsl-imx-x11-glibc-x86_64-meta-toolchain-qt5-cortexa7hf-neon-toolchain-4.1.15-2.1.0 |
=====> Output: | =====> Output: | ||
− | You are about to install the SDK to "/home/myzr/my-work/03_toolchain/fsl-imx- | + | You are about to install the SDK to "/home/myzr/my-work/03_toolchain/fsl-imx-x11-glibc-x86_64-meta-toolchain-qt5-cortexa7hf-neon-toolchain-4.1.15-2.1.0". Proceed[Y/n]? |
=====> Input: | =====> Input: | ||
y | y | ||
=====> Output: | =====> Output: | ||
− | Extracting SDK | + | Extracting SDK...............................................................................................................................................................done |
Setting it up...done | Setting it up...done | ||
SDK has been successfully set up and is ready to be used. | SDK has been successfully set up and is ready to be used. | ||
Each time you wish to use the SDK in a new shell session, you need to source the environment setup script e.g. | Each time you wish to use the SDK in a new shell session, you need to source the environment setup script e.g. | ||
− | $ . /home/myzr/my-work/03_toolchain/fsl-imx- | + | $ . /home/myzr/my-work/03_toolchain/fsl-imx-x11-glibc-x86_64-meta-toolchain-qt5-cortexa7hf-neon-toolchain-4.1.15-2.1.0/environment-setup-cortexa7hf-neon-poky-linux-gnueabi |
</pre> | </pre> | ||
* source 工具链配置文件 | * source 工具链配置文件 | ||
<pre> | <pre> | ||
=====> Input: | =====> Input: | ||
− | source /home/myzr/my-work/03_toolchain/fsl-imx- | + | source /home/myzr/my-work/03_toolchain/fsl-imx-x11-glibc-x86_64-meta-toolchain-qt5-cortexa7hf-neon-toolchain-4.1.15-2.1.0/environment-setup-cortexa7hf-neon-poky-linux-gnueabi |
</pre> | </pre> | ||
* 检验交叉编译工具安装 | * 检验交叉编译工具安装 | ||
第56行: | 第56行: | ||
Using built-in specs. | Using built-in specs. | ||
COLLECT_GCC=arm-poky-linux-gnueabi-gcc | COLLECT_GCC=arm-poky-linux-gnueabi-gcc | ||
− | COLLECT_LTO_WRAPPER=/home/myzr/my-work/03_toolchain/fsl-imx- | + | COLLECT_LTO_WRAPPER=/home/myzr/my-work/03_toolchain/fsl-imx-x11-glibc-x86_64-meta-toolchain-qt5-cortexa7hf-neon-toolchain-4.1.15-2.1.0/sysroots/x86_64-pokysdk-linux/usr/libexec/arm-poky-linux-gnueabi/gcc/arm-poky-linux-gnueabi/5.3.0/lto-wrapper |
Target: arm-poky-linux-gnueabi | Target: arm-poky-linux-gnueabi | ||
− | Configured with: ../../../../../../work-shared/gcc-5.3.0-r0/gcc-5.3.0/configure --build=x86_64-linux --host=x86_64-pokysdk-linux --target=arm-poky-linux-gnueabi --prefix=/opt/fsl-imx- | + | Configured with: ../../../../../../work-shared/gcc-5.3.0-r0/gcc-5.3.0/configure --build=x86_64-linux --host=x86_64-pokysdk-linux --target=arm-poky-linux-gnueabi --prefix=/opt/fsl-imx-x11/4.1.15-2.1.0/sysroots/x86_64-pokysdk-linux/usr --exec_prefix=/opt/fsl-imx-x11/4.1.15-2.1.0/sysroots/x86_64-pokysdk-linux/usr --bindir=/opt/fsl-imx-x11/4.1.15-2.1.0/sysroots/x86_64-pokysdk-linux/usr/bin/arm-poky-linux-gnueabi --sbindir=/opt/fsl-imx-x11/4.1.15-2.1.0/sysroots/x86_64-pokysdk-linux/usr/bin/arm-poky-linux-gnueabi --libexecdir=/opt/fsl-imx-x11/4.1.15-2.1.0/sysroots/x86_64-pokysdk-linux/usr/libexec/arm-poky-linux-gnueabi --datadir=/opt/fsl-imx-x11/4.1.15-2.1.0/sysroots/x86_64-pokysdk-linux/usr/share --sysconfdir=/opt/fsl-imx-x11/4.1.15-2.1.0/sysroots/x86_64-pokysdk-linux/etc --sharedstatedir=/opt/fsl-imx-x11/4.1.15-2.1.0/sysroots/x86_64-pokysdk-linux/com --localstatedir=/opt/fsl-imx-x11/4.1.15-2.1.0/sysroots/x86_64-pokysdk-linux/var --libdir=/opt/fsl-imx-x11/4.1.15-2.1.0/sysroots/x86_64-pokysdk-linux/usr/lib/arm-poky-linux-gnueabi --includedir=/opt/fsl-imx-x11/4.1.15-2.1.0/sysroots/x86_64-pokysdk-linux/usr/include --oldincludedir=/opt/fsl-imx-x11/4.1.15-2.1.0/sysroots/x86_64-pokysdk-linux/usr/include --infodir=/opt/fsl-imx-x11/4.1.15-2.1.0/sysroots/x86_64-pokysdk-linux/usr/share/info --mandir=/opt/fsl-imx-x11/4.1.15-2.1.0/sysroots/x86_64-pokysdk-linux/usr/share/man --disable-silent-rules --disable-dependency-tracking --with-libtool-sysroot=/home/myzr/my-yocto/imx-4.1.15-2.1.0/imx6ull14x14evk__fsl-imx-x11/tmp/sysroots/x86_64-nativesdk-pokysdk-linux --with-gnu-ld --enable-shared --enable-languages=c,c++ --enable-threads=posix --enable-multilib --enable-c99 --enable-long-long --enable-symvers=gnu --enable-libstdcxx-pch --program-prefix=arm-poky-linux-gnueabi- --without-local-prefix --enable-lto --enable-libssp --enable-libitm --disable-bootstrap --disable-libmudflap --with-system-zlib --with-linker-hash-style=gnu --enable-linker-build-id --with-ppl=no --with-cloog=no --enable-checking=release --enable-cheaders=c_global --without-isl --with-gxx-include-dir=/not/exist/usr/include/c++/5.3.0 --with-build-time-tools=/home/myzr/my-yocto/imx-4.1.15-2.1.0/imx6ull14x14evk__fsl-imx-x11/tmp/sysroots/x86_64-linux/usr/arm-poky-linux-gnueabi/bin --with-sysroot=/not/exist --with-build-sysroot=/home/myzr/my-yocto/imx-4.1.15-2.1.0/imx6ull14x14evk__fsl-imx-x11/tmp/sysroots/imx6ull14x14evk --enable-poison-system-directories --with-mpfr=/home/myzr/my-yocto/imx-4.1.15-2.1.0/imx6ull14x14evk__fsl-imx-x11/tmp/sysroots/x86_64-nativesdk-pokysdk-linux --with-mpc=/home/myzr/my-yocto/imx-4.1.15-2.1.0/imx6ull14x14evk__fsl-imx-x11/tmp/sysroots/x86_64-nativesdk-pokysdk-linux --enable-nls --with-arch=armv7-a |
Thread model: posix | Thread model: posix | ||
gcc version 5.3.0 (GCC) | gcc version 5.3.0 (GCC) | ||
第401行: | 第401行: | ||
* 珠海明远智睿科技有限公司 | * 珠海明远智睿科技有限公司 | ||
* ZhuHai MYZR Technology CO.,LTD. | * ZhuHai MYZR Technology CO.,LTD. | ||
− | * Latest Update: 2018/12/ | + | * Latest Update: 2018/12/20 |
* Supporter: Tang Bin | * Supporter: Tang Bin | ||
-------------------------------------------------------------------------------- | -------------------------------------------------------------------------------- | ||
</pre> | </pre> |
2018年12月20日 (四) 14:53的版本
下载相关文件
A7系列交叉编译工具链
A7系列包括:MY-IMX6-EK140、MY-IMX6-EK140P
网盘位置: 2.3_OS_Linux-4.1.15 -> 03_toolchain
下载 MY-IMX-A7 目录。
A9系列交叉编译工具链
A9系列包括:MY-IMX6-EK200、MY-IMX6-EK314、MY-IMX6-EK336
网盘位置: 2.3_OS_Linux-4.1.15 -> 03_toolchain
下载 MY-IMX-A9 目录。
u-boot 源码
网盘位置: 2.3_OS_Linux-4.1.15 -> 02_source
文件名: u-boot-2016.03-*.tar.bz2 (源码包版本号需svn315及以上)
Kernel 源码
网盘位置: 2.3_OS_Linux-4.1.15 -> 02_source
文件名: linux-4.1.15-*.tar.bz2 (源码包版本号需svn368及以上)
安装交叉编译工具链
MY-IMX6-A7 系列交叉编译工具链安装
- 执行安装
=====> Input: ./fsl-imx-x11-glibc-x86_64-meta-toolchain-qt5-cortexa7hf-neon-toolchain-4.1.15-2.1.0.sh =====> Output: Freescale i.MX Release Distro SDK installer version 4.1.15-2.1.0 ================================================================ Enter target directory for SDK (default: /opt/fsl-imx-x11/4.1.15-2.1.0): =====> Input: /home/myzr/my-work/03_toolchain/fsl-imx-x11-glibc-x86_64-meta-toolchain-qt5-cortexa7hf-neon-toolchain-4.1.15-2.1.0 =====> Output: You are about to install the SDK to "/home/myzr/my-work/03_toolchain/fsl-imx-x11-glibc-x86_64-meta-toolchain-qt5-cortexa7hf-neon-toolchain-4.1.15-2.1.0". Proceed[Y/n]? =====> Input: y =====> Output: Extracting SDK...............................................................................................................................................................done Setting it up...done SDK has been successfully set up and is ready to be used. Each time you wish to use the SDK in a new shell session, you need to source the environment setup script e.g. $ . /home/myzr/my-work/03_toolchain/fsl-imx-x11-glibc-x86_64-meta-toolchain-qt5-cortexa7hf-neon-toolchain-4.1.15-2.1.0/environment-setup-cortexa7hf-neon-poky-linux-gnueabi
- source 工具链配置文件
=====> Input: source /home/myzr/my-work/03_toolchain/fsl-imx-x11-glibc-x86_64-meta-toolchain-qt5-cortexa7hf-neon-toolchain-4.1.15-2.1.0/environment-setup-cortexa7hf-neon-poky-linux-gnueabi
- 检验交叉编译工具安装
=====> Input: $CC -v =====> Output: Using built-in specs. COLLECT_GCC=arm-poky-linux-gnueabi-gcc COLLECT_LTO_WRAPPER=/home/myzr/my-work/03_toolchain/fsl-imx-x11-glibc-x86_64-meta-toolchain-qt5-cortexa7hf-neon-toolchain-4.1.15-2.1.0/sysroots/x86_64-pokysdk-linux/usr/libexec/arm-poky-linux-gnueabi/gcc/arm-poky-linux-gnueabi/5.3.0/lto-wrapper Target: arm-poky-linux-gnueabi Configured with: ../../../../../../work-shared/gcc-5.3.0-r0/gcc-5.3.0/configure --build=x86_64-linux --host=x86_64-pokysdk-linux --target=arm-poky-linux-gnueabi --prefix=/opt/fsl-imx-x11/4.1.15-2.1.0/sysroots/x86_64-pokysdk-linux/usr --exec_prefix=/opt/fsl-imx-x11/4.1.15-2.1.0/sysroots/x86_64-pokysdk-linux/usr --bindir=/opt/fsl-imx-x11/4.1.15-2.1.0/sysroots/x86_64-pokysdk-linux/usr/bin/arm-poky-linux-gnueabi --sbindir=/opt/fsl-imx-x11/4.1.15-2.1.0/sysroots/x86_64-pokysdk-linux/usr/bin/arm-poky-linux-gnueabi --libexecdir=/opt/fsl-imx-x11/4.1.15-2.1.0/sysroots/x86_64-pokysdk-linux/usr/libexec/arm-poky-linux-gnueabi --datadir=/opt/fsl-imx-x11/4.1.15-2.1.0/sysroots/x86_64-pokysdk-linux/usr/share --sysconfdir=/opt/fsl-imx-x11/4.1.15-2.1.0/sysroots/x86_64-pokysdk-linux/etc --sharedstatedir=/opt/fsl-imx-x11/4.1.15-2.1.0/sysroots/x86_64-pokysdk-linux/com --localstatedir=/opt/fsl-imx-x11/4.1.15-2.1.0/sysroots/x86_64-pokysdk-linux/var --libdir=/opt/fsl-imx-x11/4.1.15-2.1.0/sysroots/x86_64-pokysdk-linux/usr/lib/arm-poky-linux-gnueabi --includedir=/opt/fsl-imx-x11/4.1.15-2.1.0/sysroots/x86_64-pokysdk-linux/usr/include --oldincludedir=/opt/fsl-imx-x11/4.1.15-2.1.0/sysroots/x86_64-pokysdk-linux/usr/include --infodir=/opt/fsl-imx-x11/4.1.15-2.1.0/sysroots/x86_64-pokysdk-linux/usr/share/info --mandir=/opt/fsl-imx-x11/4.1.15-2.1.0/sysroots/x86_64-pokysdk-linux/usr/share/man --disable-silent-rules --disable-dependency-tracking --with-libtool-sysroot=/home/myzr/my-yocto/imx-4.1.15-2.1.0/imx6ull14x14evk__fsl-imx-x11/tmp/sysroots/x86_64-nativesdk-pokysdk-linux --with-gnu-ld --enable-shared --enable-languages=c,c++ --enable-threads=posix --enable-multilib --enable-c99 --enable-long-long --enable-symvers=gnu --enable-libstdcxx-pch --program-prefix=arm-poky-linux-gnueabi- --without-local-prefix --enable-lto --enable-libssp --enable-libitm --disable-bootstrap --disable-libmudflap --with-system-zlib --with-linker-hash-style=gnu --enable-linker-build-id --with-ppl=no --with-cloog=no --enable-checking=release --enable-cheaders=c_global --without-isl --with-gxx-include-dir=/not/exist/usr/include/c++/5.3.0 --with-build-time-tools=/home/myzr/my-yocto/imx-4.1.15-2.1.0/imx6ull14x14evk__fsl-imx-x11/tmp/sysroots/x86_64-linux/usr/arm-poky-linux-gnueabi/bin --with-sysroot=/not/exist --with-build-sysroot=/home/myzr/my-yocto/imx-4.1.15-2.1.0/imx6ull14x14evk__fsl-imx-x11/tmp/sysroots/imx6ull14x14evk --enable-poison-system-directories --with-mpfr=/home/myzr/my-yocto/imx-4.1.15-2.1.0/imx6ull14x14evk__fsl-imx-x11/tmp/sysroots/x86_64-nativesdk-pokysdk-linux --with-mpc=/home/myzr/my-yocto/imx-4.1.15-2.1.0/imx6ull14x14evk__fsl-imx-x11/tmp/sysroots/x86_64-nativesdk-pokysdk-linux --enable-nls --with-arch=armv7-a Thread model: posix gcc version 5.3.0 (GCC)
MY-IMX6-A9 系列交叉编译工具链安装
- 执行安装
=====> Input: ./fsl-imx-fb-glibc-x86_64-meta-toolchain-qt5-cortexa9hf-neon-toolchain-4.1.15-2.1.0.sh =====> Output: Freescale i.MX Release Distro SDK installer version 4.1.15-2.1.0 ================================================================ Enter target directory for SDK (default: /opt/fsl-imx-fb/4.1.15-2.1.0) =====> Input: /opt/fsl-imx-fb-glibc-x86_64-meta-toolchain-qt5-cortexa9hf-neon-toolchain-4.1.15-2.1.0 =====> Output: You are about to install the SDK to "/opt/fsl-imx-fb-glibc-x86_64-meta-toolchain-qt5-cortexa9hf-neon-toolchain-4.1.15-2.1.0". Proceed[Y/n]? =====> Input: y =====> Output: Extracting SDK..............................................................................................................................................................done Setting it up...done SDK has been successfully set up and is ready to be used. Each time you wish to use the SDK in a new shell session, you need to source the environment setup script e.g. $ . /opt/fsl-imx-fb-glibc-x86_64-meta-toolchain-qt5-cortexa9hf-neon-toolchain-4.1.15-2.1.0/environment-setup-cortexa9hf-neon-poky-linux-gnueabi
- source 工具链配置文件
=====> Input: source /opt/fsl-imx-fb-glibc-x86_64-meta-toolchain-qt5-cortexa9hf-neon-toolchain-4.1.15-2.1.0/environment-setup-cortexa9hf-neon-poky-linux-gnueabi
- 检验交叉编译工具安装
=====> Input: $CC -v =====> Output: Using built-in specs. COLLECT_GCC=arm-poky-linux-gnueabi-gcc COLLECT_LTO_WRAPPER=/opt/fsl-imx-fb-glibc-x86_64-meta-toolchain-qt5-cortexa9hf-neon-toolchain-4.1.15-2.1.0/sysroots/x86_64-pokysdk-linux/usr/libexec/arm-poky-linux-gnueabi/gcc/arm-poky-linux-gnueabi/5.3.0/lto-wrapper Target: arm-poky-linux-gnueabi Configured with: ../../../../../../work-shared/gcc-5.3.0-r0/gcc-5.3.0/configure --build=x86_64-linux --host=x86_64-pokysdk-linux --target=arm-poky-linux-gnueabi --prefix=/opt/fsl-imx-fb/4.1.15-2.1.0/sysroots/x86_64-pokysdk-linux/usr --exec_prefix=/opt/fsl-imx-fb/4.1.15-2.1.0/sysroots/x86_64-pokysdk-linux/usr --bindir=/opt/fsl-imx-fb/4.1.15-2.1.0/sysroots/x86_64-pokysdk-linux/usr/bin/arm-poky-linux-gnueabi --sbindir=/opt/fsl-imx-fb/4.1.15-2.1.0/sysroots/x86_64-pokysdk-linux/usr/bin/arm-poky-linux-gnueabi --libexecdir=/opt/fsl-imx-fb/4.1.15-2.1.0/sysroots/x86_64-pokysdk-linux/usr/libexec/arm-poky-linux-gnueabi --datadir=/opt/fsl-imx-fb/4.1.15-2.1.0/sysroots/x86_64-pokysdk-linux/usr/share --sysconfdir=/opt/fsl-imx-fb/4.1.15-2.1.0/sysroots/x86_64-pokysdk-linux/etc --sharedstatedir=/opt/fsl-imx-fb/4.1.15-2.1.0/sysroots/x86_64-pokysdk-linux/com --localstatedir=/opt/fsl-imx-fb/4.1.15-2.1.0/sysroots/x86_64-pokysdk-linux/var --libdir=/opt/fsl-imx-fb/4.1.15-2.1.0/sysroots/x86_64-pokysdk-linux/usr/lib/arm-poky-linux-gnueabi --includedir=/opt/fsl-imx-fb/4.1.15-2.1.0/sysroots/x86_64-pokysdk-linux/usr/include --oldincludedir=/opt/fsl-imx-fb/4.1.15-2.1.0/sysroots/x86_64-pokysdk-linux/usr/include --infodir=/opt/fsl-imx-fb/4.1.15-2.1.0/sysroots/x86_64-pokysdk-linux/usr/share/info --mandir=/opt/fsl-imx-fb/4.1.15-2.1.0/sysroots/x86_64-pokysdk-linux/usr/share/man --disable-silent-rules --disable-dependency-tracking --with-libtool-sysroot=/home/myzr/my-yocto/imx-4.1.15-2.1.0/imx6qdlsolo__fsl-imx-fb/tmp/sysroots/x86_64-nativesdk-pokysdk-linux --with-gnu-ld --enable-shared --enable-languages=c,c++ --enable-threads=posix --enable-multilib --enable-c99 --enable-long-long --enable-symvers=gnu --enable-libstdcxx-pch --program-prefix=arm-poky-linux-gnueabi- --without-local-prefix --enable-lto --enable-libssp --enable-libitm --disable-bootstrap --disable-libmudflap --with-system-zlib --with-linker-hash-style=gnu --enable-linker-build-id --with-ppl=no --with-cloog=no --enable-checking=release --enable-cheaders=c_global --without-isl --with-gxx-include-dir=/not/exist/usr/include/c++/5.3.0 --with-build-time-tools=/home/myzr/my-yocto/imx-4.1.15-2.1.0/imx6qdlsolo__fsl-imx-fb/tmp/sysroots/x86_64-linux/usr/arm-poky-linux-gnueabi/bin --with-sysroot=/not/exist --with-build-sysroot=/home/myzr/my-yocto/imx-4.1.15-2.1.0/imx6qdlsolo__fsl-imx-fb/tmp/sysroots/imx6qdlsolo --enable-poison-system-directories --with-mpfr=/home/myzr/my-yocto/imx-4.1.15-2.1.0/imx6qdlsolo__fsl-imx-fb/tmp/sysroots/x86_64-nativesdk-pokysdk-linux --with-mpc=/home/myzr/my-yocto/imx-4.1.15-2.1.0/imx6qdlsolo__fsl-imx-fb/tmp/sysroots/x86_64-nativesdk-pokysdk-linux --enable-nls --with-arch=armv7-a Thread model: posix gcc version 5.3.0 (GCC)
u-boot编译
编译前的准备
- 创建编译工作目录
=====> Input: mkdir ~/my-work/02_source/ -p
- 解压源码包到工作目录
=====> Input: tar xf u-boot-2016.03-svn*.tar.bz2 -C ~/my-work/02_source/
编译u-boot目标文件
- 进入源码目录
=====> Input: cd ~/my-work/02_source/u-boot-2016.03
- 生成目标开发板的 .config 文件
=====> Input: make myimx6ek200-6q-1g_defconfig =====> Output: HOSTCC scripts/basic/fixdep HOSTCC scripts/kconfig/conf.o SHIPPED scripts/kconfig/zconf.tab.c SHIPPED scripts/kconfig/zconf.lex.c SHIPPED scripts/kconfig/zconf.hash.c HOSTCC scripts/kconfig/zconf.tab.o HOSTLD scripts/kconfig/conf # # configuration written to .config #
- 执行编译
=====> Input: make =====> Output: scripts/kconfig/conf --silentoldconfig Kconfig CHK include/config.h UPD include/config.h GEN include/autoconf.mk GEN include/autoconf.mk.dep CHK include/config/uboot.release UPD include/config/uboot.release CHK include/generated/version_autogenerated.h ...... LD u-boot OBJCOPY u-boot-nodtb.bin OBJCOPY u-boot.srec SYM u-boot.sym COPY u-boot.bin CFGS board/myzr/myimx6/myimx6a9-6q-ddr3.cfg.cfgtmp MKIMAGE u-boot.imx
Note: 如果有提示 “cc1: error”,通常是交叉编译工具的配置没生效,可以按前面 “交叉编译工具链安装” 中的 “source 工具链配置文件” 操作一次后再执行此步骤。
- 目标文件改名
=====> Input: cp u-boot.imx uboot-myimx6ek200-6q-1g.imx
编译u-boot环境变量脚本
=====> Input: ./tools/mkimage -A arm -O linux -T script -C none -a 0 -e 0 -n "MYZR script" -d my_env_src/myimx6a9_4115_script.cmd my_env_script.scr =====> Output: Image Name: MYZR script Created: Thu Nov 8 11:05:19 2018 Image Type: ARM Linux Script (uncompressed) Data Size: 2101 Bytes = 2.05 kB = 0.00 MB Load Address: 00000000 Entry Point: 00000000 Contents: Image 0: 2093 Bytes = 2.04 kB = 0.00 MB
目标文件
uboot-myimx6ek200-6q-1g.imx 和 my_env_script.scr 即编译得到的目标文件,保存这两个文件
内核编译
编译前的准备
- 创建编译工作目录
=====> Input: mkdir ~/my-work/02_source/ -p
- 解压源码包到工作目录
=====> Input: tar xf linux-4.1.15-svn*.tar.bz2 -C ~/my-work/02_source/
编译内核目标文件
- 进入内核源码目录
=====> Input: cd ~/my-work/02_source/linux-4.1.15
- 生成目标平台的 .config 文件
=====> Input: make myimx6a9_defconfig =====> Output: HOSTCC scripts/basic/fixdep HOSTCC scripts/kconfig/conf.o SHIPPED scripts/kconfig/zconf.tab.c SHIPPED scripts/kconfig/zconf.lex.c SHIPPED scripts/kconfig/zconf.hash.c HOSTCC scripts/kconfig/zconf.tab.o HOSTLD scripts/kconfig/conf # # configuration written to .config #
Note: 如果有“Can't find default configuration "arch/x86/configs” 的错误,是因为交叉编译工具链的配置没有生效,可以按前面 “交叉编译工具链安装” 中的 “source 工具链配置文件” 操作一次后再执行此步骤
- 编译内核目标文件
=====> Input: make zImage =====> Output: scripts/kconfig/conf --silentoldconfig Kconfig CHK include/config/kernel.release UPD include/config/kernel.release WRAP arch/arm/include/generated/asm/auxvec.h ...... AS arch/arm/boot/compressed/piggy.lzo.o LD arch/arm/boot/compressed/vmlinux OBJCOPY arch/arm/boot/zImage Kernel: arch/arm/boot/zImage is ready
- 内核目标文件改名
=====> Input: cp arch/arm/boot/zImage zImage-myimx6a9
编译设备树目标文件
- 执行编译命令
=====> Input: make myimx6ek200-6q-1g.dtb =====> Output: DTC arch/arm/boot/dts/myimx6ek200-6q-1g.dtb
- 复制设备树目标文件
=====> Input: cp arch/arm/boot/dts/myimx6ek200-6q-1g.dtb ./
编译内核模块包
- 执行编译
=====> Input: make modules =====> Output: scripts/kconfig/conf --silentoldconfig Kconfig CHK include/config/kernel.release WRAP arch/arm/include/generated/asm/bitsperlong.h WRAP arch/arm/include/generated/asm/current.h ...... LD [M] sound/usb/snd-usb-audio.ko LD [M] sound/usb/snd-usbmidi-lib.ko LD [M] sound/core/snd-rawmidi.ko
- 创建内核模块的保存目录
=====> Input: mkdir modules
- 安装内核模块到指定目录
=====> Input: make modules_install INSTALL_MOD_PATH=./modules =====> Output: INSTALL crypto/tcrypt.ko INSTALL drivers/dma/dmatest.ko INSTALL drivers/i2c/algos/i2c-algo-pca.ko ...... INSTALL sound/usb/snd-usb-audio.ko INSTALL sound/usb/snd-usbmidi-lib.ko DEPMOD 4.1.15-myimx6-svn368
- 打包内核模块文件
=====> Input: tar cjf kernel-modules-myimx6a9.tar.bz2 -C modules lib
目标文件
zImage-myimx6a9、myimx6ek200-6q-1g.dtb 和 kernel-modules-myimx6a9.tar.bz2 即编译得到的目标文件,保存这三个文件
Linux C程序编译
准备源码
- 下载Demo源码
位置:5_MY-Demo -> MY-Linux-C-Demo
文件名:hello.c - 复制源码到开发主机中
MY-IMX6-A9 Linux C程序编译
- 编译目标文件
=====> Input: $CC hello.c -o hello.out
Note: 如果有“未找到命令”的信息,是因为交叉编译工具链的配置没有生效,可以按前面 “交叉编译工具链安装” 中的 “source 工具链配置文件” 操作一次后再执行此步骤
运行Linux C目标程序
- 把编译得到的 hello.out 复制到开发板上
- 在开发板上运行Linux C目标程序
=====> Input: ./hello.out =====> Output: MYZR Technology Co.,Ltd. Web: http://www.myzr.com.cn/ Wiki: http://wiki.myzr.com.cn/ BBS: http://bbs.myzr.com.cn/ Tel: 0756-3628023/3628021 E-mail: service@myzr.com.cn
Note: 如果有“Permission denied”的信息,通常是目标程序没有可执行权限,可以参照下面指令增加目标文件的可执行权限后再运行程序
=====> Input: chmod +x ./hello.out
Linux QT5程序编译
准备源码
- 下载Demo源码
位置:5_MY-Demo
文件名:MY-Linux-QT5-Demo-AboutUs-svn*.tar.bz2 - 解压源码包到工作目录
=====> Input: tar xf MY-Linux-QT5-Demo-AboutUs-svn*.tar.bz2 -C ~/my-work/02_source/
MY-IMX6-A9 QT程序编译
- 进入源码目录
=====> Input: cd ~/my-work/02_source/AboutUs/
- 生成Makefile文件
=====> Input: qmake
Note1: 如果有“未找到 'qamke' 命令”的信息,是因为交叉编译工具链的配置没有生效,可以按前面 “交叉编译工具链安装” 中的 “source 工具链配置文件” 操作一次后再执行此步骤
Note2: 如果有“oe-device-extra.pri: No such file or directory”的信息,执行下面命令后再执行qmake:
=====> Input: touch /opt/fsl-imx-fb-glibc-x86_64-meta-toolchain-qt5-cortexa9hf-neon-toolchain-4.1.15-2.1.0/sysroots/cortexa9hf-neon-poky-linux-gnueabi/usr/lib/qt5/mkspecs/oe-device-extra.pri
- 编译目标文件
=====> Input: make =====> Output: /opt/fsl-imx-fb-glibc-x86_64-meta-toolchain-qt5-cortexa9hf-neon-toolchain-4.1.15-2.1.0/sysroots/x86_64-pokysdk-linux/usr/bin/qt5/uic widget.ui -o ui_widget.h ...... arm-poky-linux-gnueabi-g++ -march=armv7-a -mfpu=neon -mfloat-abi=hard -mcpu=cortex-a9 --sysroot=/opt/fsl-imx-fb-glibc-x86_64-meta-toolchain-qt5-cortexa9hf-neon-toolchain-4.1.15-2.1.0/sysroots/cortexa9hf-neon-poky-linux-gnueabi -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed -Wl,-O1 -o AboutUs main.o widget.o qrc_source.o moc_widget.o -lQt5Widgets -lQt5Gui -lQt5Core -lGLESv2 -lEGL -lpthread
运行Linux QT5目标程序
- 把编译得到的 AboutUs 复制到开发板上
- 在开发板上运行QT5目标程序
=====> Input: ./AboutUs -platform eglfs
Note: 如果有“Permission denied”的信息,通常是目标程序没有可执行权限,可以参照下面指令增加目标文件的可执行权限后再运行程序
=====> Input: chmod +x ./AboutUs
- 运行结果
可以看到开发板显示屏上输出了 MYZR 的 Logo 和一些信息。
-------------------------------------------------------------------------------- * 珠海明远智睿科技有限公司 * ZhuHai MYZR Technology CO.,LTD. * Latest Update: 2018/12/20 * Supporter: Tang Bin --------------------------------------------------------------------------------