“MYZR-IMX8M-EK300 Programming Manual”的版本间的差异

来自明远智睿的wiki
跳转至: 导航搜索
(创建页面,内容为“### download file --------------------------------------------------------------------------------   Open the network disk to “2.1_OS_Linux-4.14.98 -> 01_Ma...”)
 
(Admin移动页面MY-IMX8M-EK300 Programming ManualMYZR-IMX8M-EK300 Programming Manual,不留重定向)
 
(没有差异)

2020年10月22日 (四) 16:10的最新版本

download file


  Open the network disk to “2.1_OS_Linux-4.14.98 -> 01_ManufacturingToolkit”,download “UUU-MYIMX8M-L4.14.98” Directory and “UUU-MYIMX8M-L4.14.98-Patch.*.rar” Archive。


unzip files


  Unzip MYIMX8M-L4.14.98-Patch.*.rar,Copy fsl-image-validation-myimx8m.tar.bz2 and fsl-image-validation-myimx8m.manifest to image-rootfs-L4.14.98 Directory。


Connect the programming cable


  To power off the development board, connect the programming port of the development board to the PC with a USB cable.


Dial to download mode


  And set the "Boot Mode" of the development board to "OFF ON"。


Perform burning


  Power on the development board and double-click to run the "myimx8mek300-8mq.bat" file. At this time, the Windows command line window will see the following information:

uuu (Universal Update Utility) for nxp imx chips -- libuuu_1.2.135-0-gacaf035
Success 0    Failure 0
1:32    ......


Burning completed


  After the programming is complete, the Windows command line window information is as follows:

uuu (Universal Update Utility) for nxp imx chips -- libuuu_1.2.135-0-gacaf035
Success 1    Failure 0
1:32    24/24 [Done                                  ] FBK: DONE
请按任意键继续. . .


Start development board


  Power off the development board, set "Boot Mode" to "ON OFF", and power on the development board, the development board can start normally.