MYZR-IMX8M-EK300 Programming Manual

download file

---

　　Open the network disk to “2.1_OS_Linux-4.14.98 -> 01_ManufacturingToolkit”，download “UUU-MYIMX8M-L4.14.98” Directory and “UUU-MYIMX8M-L4.14.98-Patch.*.rar” Archive。

unzip files

---

　　Unzip MYIMX8M-L4.14.98-Patch.*.rar，Copy fsl-image-validation-myimx8m.tar.bz2 and fsl-image-validation-myimx8m.manifest to image-rootfs-L4.14.98 Directory。

Connect the programming cable

---

　　To power off the development board, connect the programming port of the development board to the PC with a USB cable.

Dial to download mode

---

　　And set the "Boot Mode" of the development board to "OFF ON"。

Perform burning

---

　　Power on the development board and double-click to run the "myimx8mek300-8mq.bat" file. At this time, the Windows command line window will see the following information:

uuu (Universal Update Utility) for nxp imx chips -- libuuu_1.2.135-0-gacaf035
Success 0    Failure 0
1:32    ......

Burning completed

---

　　After the programming is complete, the Windows command line window information is as follows：

uuu (Universal Update Utility) for nxp imx chips -- libuuu_1.2.135-0-gacaf035
Success 1    Failure 0
1:32    24/24 [Done                                  ] FBK: DONE
请按任意键继续. . .

Start development board

---

　　Power off the development board, set "Boot Mode" to "ON OFF", and power on the development board, the development board can start normally.