查看“MYZR-RK3288-EK314 启动手册”的源代码
←
MYZR-RK3288-EK314 启动手册
跳转至:
导航
、
搜索
因为以下原因,您没有权限编辑本页:
您所请求的操作仅限于该用户组的用户使用:
用户
您可以查看与复制此页面的源代码。
<div> = '''准备开发板套件(prepare development board kits)''' = ---- 开发板套件由开发板和开发板配件组成。<br> <span style="background:#CCCCCC">Development board kits consist of development board and its accessories.<br> == '''开发板(development board)''' == 开发板由以下器件组装而成:<br> <span style="background:#CCCCCC">Development board consist of following components:<br> * MY-RK3288-CB314(核心板) 一片<br> * <span style="background:#CCCCCC"> MY-RK3288-CB314 (core board),one unit<br> * MY-RK3288-MB314(底板) 一片<br> * <span style="background:#CCCCCC"> MY-RK3288-MB314 (bottom board),one unit<br> * 显示屏电路板一片<br> *<span style="background:#CCCCCC"> Circuit board of screen panel,one unit<br> * 液晶显示屏一块<br> * <span style="background:#CCCCCC">Crystal liquid screen,one piece<br> * 触摸屏一片<br> *<span style="background:#CCCCCC"> Touch screen,one unit<br> == '''开发板配件(development board accessory)''' == 开发板配件有:<br> <span style="background:#CCCCCC">development board accessories include: <br> * 电源适配器1个<br> *<span style="background:#CCCCCC"> adaptor,one unit<br> * USB下载线1条<br> *<span style="background:#CCCCCC"> USB download cable,one piece<br> * 网线1条<br> *<span style="background:#CCCCCC"> internet cable,one piece<br> * 串口线1条<br> *<span style="background:#CCCCCC">serial line,one piece<br> = '''开发板接口概览(overview of development board interface)''' = ---- 在启动开发板之前我们需要认识一些接口,并将这些接口正确连接到计算机。这里我先认识MY-RK3288-MB314的接口。<br> <span style="background:#CCCCCC"> Before starting the development board, we need to recognize some interfaces and connect them to the computer correctly.Here I first know the interface of MY-RK3288-MB314 .<br> MY-R3288-MB314 正面图(MY-R3288-MB314 front view):<br> [[文件:myrk3288_mb314_1.1.0.1.jpg|642px]]<br> MY-R3288-MB314 背面图(MY-R3288-MB314 rear view):<br> [[文件:myrk3288_mb314_1.2.0.1.jpg|642px]]<br> = '''快速启动开发板(fast boot development board)''' = ---- 1)跳到“开发板与计算机的连接”那一节中“关闭电源开关”,“连接电源线”操作。<br> 1)<span style="background:#CCCCCC"> skip to "off power switch" and "connect power line" in the section "connection between development board and computer". <br> 2)跳到“开发板的启动”那一节中的“为开发板上电”,从那开始继续操作。<br> 2)<span style="background:#CCCCCC"> skip to "power the development board" in the section "start the development board" and proceed from there. <br> 说明:快速启动方式下,开发板与计算机没有连接,但是从液晶屏上是可以看出系统启动状态的。<br> <span style="background:#CCCCCC">Note: the development board is not connected to the computer in the fast start mode, but the system start state can be seen from the LCD screen.<br> == '''开发板与计算机的连接( development board is connected to the computer)''' == 由于在很多情况下我们需要连接开发板与计算机,下面内容将描述开发板与计算机的连接方式。<br> <span style="background:#CCCCCC">Because in many cases we need to connect the development board to the computer, the following describes how the development board connects to the computer.<br> === '''关闭电源开关(Power switch off)''' === 1) 在连接开发板与计算机之前,我们需要检查开发板电源开关状态,并确保电源开关是断开状态。<br> 1)<span style="background:#CCCCCC">Before connecting the development board to the computer, we need to check the power switch status of the development board and ensure that the power switch is disconnected.<br> 2) 使开发板电源开关处于断开的方式是:将开发板电源开关(开发板正面图的图示MAIN POWER SW)按到断开状态(—:闭合,O:断开)。<br> 2)<span style="background:#CCCCCC">The way to keep the POWER switch on the development board in a disconnected state is to press the POWER switch on the development board (the MAIN POWER SW shown in the drawing on the front of the development board) to a disconnected state (-- : close, O: disconnect).<br> === '''串口线的连接(Connection of serial lines)''' === 将串口线一端连接到开发板的正面图DEBUG UART接口,一端连接到计算机。<br> <span style="background:#CCCCCC">Connect one end of the serial port line to the DEBUG UART interface on the front of the development board, and the other end to the computer.<br> 说明(Introductions): 1)如果计算机没有串口,则需要自行准备USB转串口线并连接。<br> 1)<span style="background:#CCCCCC">If the computer does not have a serial port, you need to prepare your own USB cable and connect it.<br> 2)如果没有连接串口线,将不能通过串口方式与开发板交互。但是不影响开发板的启动及烧录系统。<br> 2)<span style="background:#CCCCCC">If there is no connection to the serial port line, you will not be able to interact with the development board in a serial port manner.However, it does not affect the starting and burning system of the development board.<br> == '''串口终端工具配置(Serial port terminal tool configuration)''' == 1)通过Windows的设备管理器找到计算机上我们使用端口号。<br> 1)<span style="background:#CCCCCC">Find the port number we use on the computer through the Windows device manager.<br> 2)配置串口终端工具的各参数。<br> 2)<span style="background:#CCCCCC">Configure the parameters of the serial port terminal tool.<br> SecureCRT & USB串口3 示例配置如下:<br> <span style="background:#CCCCCC">The SecureCRT & USB serial port 3 example configuration is as follows:<br> [[文件:myrk3288_EK314_3.2.0.1.jpg|642px]]<br> == '''网线的连接(Network connection)''' == 将网线一端连接到开发板的正面图的1000M Ethernet 或10M/100M Ethernet接口,网线另一端插入计算机的网口。<br> <span style="background:#CCCCCC">Connect one end of the wire to the 1000M or 10M/100M Ethernet interface on the front of the development board, and insert the other end of the wire into the computer's network port.<br> == '''USB下载线的连接(USB download the connection)''' == 将USB线一端连接到开发板的正面图OTG接口,另外一端插入计算机的USB接口。<br> <span style="background:#CCCCCC">Connect one end of the USB cable to the OTG interface on the front of the development board, and insert the other end into the USB interface of the computer.<br> == '''连接电源线(Connect the power cord)''' == 将电源线一端连接到开发板的正面图DC_5V_IN接口,一端连接电源插座。<br> <span style="background:#CCCCCC">Connect one end of the power cord to the DC_5V_IN interface on the front of the development board, and one end to the power socket.<br> == '''开发板的启动(Start the development board)''' == 1)在“开发板与计算机的连接”中按照顺序进行操作后,我们的开发板与计算机的连接已经完成了。<br> 1)<span style="background:#CCCCCC">After working in sequence in "development board to computer connection", our development board to computer connection has been completed.<br> 2)要使开发板启动,我们需要为开发板上电。<br> 2)<span style="background:#CCCCCC"> to enable the development board to start up, we need to power the development board.<br> 3)将开发板电源开关开发板正面图MAIN POWER SW按到闭合状态(—:闭合,O:断开)。<br> 3)<span style="background:#CCCCCC">Press the MAIN POWER SW to the closed state (-- : close, O: disconnect) on the front of the development board POWER switch.<br> 4)然后按住开发板正面图SLEEP WAKE按钮直到开发板的LED灯亮起来为止。<br> 4)<span style="background:#CCCCCC">Then hold down the SLEEP WAKE button on the front of the development board until the LED light of the development board lights up.<br> == '''观察启动状况(observe booting condition)''' == === '''串口终端动态(serial port terminal dynamics)''' === 会看到计算机的串口终端有开发板启动过程中输出的启动过程信息。<br> <span style="background:#CCCCCC">you can see the information about booting process outputed during the course of development board booting through serial port terminal。<br> 启动串口打印信息如下:<br> <span style="background:#CCCCCC">After starting, the serial port printing information is as follows:<br> [[文件:MY-R3288-EK314_3.7.1.1.png|642px]]<br> === '''显示屏状态(Display status)''' === 如果液晶显示屏正确连接,会看到在开发板的启动过程中显示屏有输出图像。<br> <span style="background:#CCCCCC">If the LCD is properly connected, you will see an output image of the display during the startup of the development board.<br> </div>
返回至
MYZR-RK3288-EK314 启动手册
。
导航菜单
个人工具
登录
命名空间
页面
讨论
变种
视图
阅读
查看源代码
查看历史
更多
搜索
[-_-]
NXP平台:
MYZR-IMX6-EK200
MYZR-IMX6-EK200(EN)
MYZR-IMX6-EK314
MYZR-IMX6-EK314(EN)
MYZR-IMX6-EK336
MYZR-IMX6-EK336(EN)
MYZR-IMX6-EK140
MYZR-IMX6-EK140(EN)
MYZR-IMX6-EK140P
MYZR-IMX6-EK140P(EN)
MYZR-IMX8M-EK300
MYZR-IMX8M-EK300(EN)
MYZR-IMX8M-EVK
MYZR-IMX8Mmini-EK240
MYZR-IMX8Mmini-EK240(EN)
MYZR-IMX28-EK142
MYZR-IMX28-EK142(EN)
MYZR-LS1012A-EK200
MYZR-LS1012A-EK200(EN)
Rockchip平台:
MYZR-RK3288-EK314
MYZR-RK3288-EK314(EN)
MYZR-RK3399-EK314
MYZR-RK3399-EK314(EN)
Allwinner平台:
MYZR-R16-EK166
MYZR-R16-EK166(EN)
Microchip平台:
MYZR-SAMA5-EK200
MYZR-SAMA5-EK200(EN)
网关产品:
GW200
GW300
GW310/GW311
ST平台:
MYZR-STM32-EK152
所有页面
工具
链入页面
相关更改
特殊页面
页面信息